Previous Thread
nice one :)
I have just uploaded a new version of my dd-wrt mod:
Changes:
-Samba is now restarted if you change its configuration via webinterface
-XFS filesystem support removed. Is anyone using it? It needs lots of flash space and I doubt people need this
-fuse + NTFS-3G added, it does not yet automount your external drives with ntfs filesystem, for now this can be done either by using dd-wrt command section in webui or via commandline, just insmod /lib/modules/2.6.24.111/kernel/fs/fuse/fuse.ko and then mount using ntfs-3g /dev/discs/disc0/part1 /jffs (mounts 1st partition)
-inotify support added, needed for minidlna(not yet included)
-compiled with optimization, increases read/writes speeds by about 10%
@Peter, can you update the link in the download section?
Administrator
- member since: 01/02/2008
- rank: 3 of 27868
- 35 articles authored
- 78 forum threads started
- 216 comments
May 20, 2010 5:27 PM
Tried this one as well but I can't get no USB connection.
Tried various divises with no result.
all divises where formated FAT.
Any tips?
Member
- member since: 02/28/2010
- rank: 4 of 27868
- 1 articles authored
- 27 forum threads started
- 1007 comments
May 20, 2010 5:35 PM
What is the status window displaying?
You find it under: Services->USB->Disk Info
Member
- member since: 02/28/2010
- rank: 4 of 27868
- 1 articles authored
- 27 forum threads started
- 1007 comments
May 21, 2010 2:13 AM
If it is not available, then either nvram is corrupted or the flash process went wrong. Do a 30/30/30 reset and check again.
30/30/30Reset is done this way:
the device is powered on, you press the reset button 30s, while pressing the button, power off for 30s, still pressing, power on and hold another 30s.
Now nvram gets cleared and all default values will be set.
Since you said: Tried various divises with no result.
I guess by trying so many different firmwares the nvram got filled up with values that were never cleared again.
May 21, 2010 2:50 PM
I don't no what's going wrong but the hdd goes sleeps after plugin it in.
First the hdd has a short boot-up and then it sleeps.
When i plug it in and out for a seccond time nothing happens.
I have the same reslut whit a usb memory stick.
It look like there is a power problem on the usb port.
May 21, 2010 3:04 PM
I found the solution for this problem on an other discussion on this forum.
The 30/30/30 reset is not enough. But using the power button solves it al.
I just powered it of with the power button. waited for 10 sec. powered it on again and the usb works again.
Add Your Reply
Sponsored Links
Copyright © 2012
Capable Networks LLC.. All Rights Reserved.
RSS |
Privacy Policy |
Advertise With Us |
Terms of Use |
About Us |
Contact Us |
Site Map
Our Capable Community Network:
DVR playground |
Explore3DTV |
MediaSmart Home |
MotoDash |
My Open Router |
Pogoplugged |
DijitCommunity |
Robo Community |
Sansa Community |
TechLore |
TiVo Community |
TouchSmartDevZone
MyOpenRouter.com is not affiliated with NETGEAR®. NETGEAR is a registered trademark of NETGEAR, Inc. in the United States and/or other countries. Other brand names mentioned herein are for identification purposes only and may be trademarks of their respective holder(s). © 2011 NETGEAR, Inc. All rights reserved.
