Can someone please help with router setup? no internet after dd-wrt install?

Previous Thread | Next Thread

Learn about scoring Forum's Raw Score: 100064.0

July 31, 2010 08:30 AM

Categories: Troubleshooting

Rating (0 votes)

Rate This!

MrHants

Member
Joined: 07/28/2010

Worked out of the box with stock firmware, attached the router to my bebox (BE ISP adsl2 modem/router), and it configured itself and worked fine...

Upgraded to latest beta dd-wrt, and I cant connect to internet... Im sure it probably a clash of network ranges on the 2 routers, but am not sure how I should go about fixing it...

The bebox is set to dhcp server, and its addres is:

192.168.1.254

It is currently setup as a dhcp server

192.168.1.64 - 192.168.1.253

Now I know when the netgear boots, it wants to be 192.168.1.1

Im just not sure how to go about resolving it, can someone please help?

Thanks

Discussion:

MrHants

Member

member since: 07/28/2010
rank: 606 of 28504
3 forum threads started
5 comments

July 31, 2010 11:43 AM updated: July 31, 2010 11:44 AM

Ok, so I eventually had some success.. after figuring out Id cocked up a setting on the dsl router, all works, great, but wanted to clarify a few things...

DSL 192.168.1.254
WAN 192.168.1.64 (DHCP FROM DSL ROUTER - I WILL DISBALE DHCP & MAKE STATIC)
NETGEAR 192.168.2.1

Advanced Rotuer settings are set at Gateway (default), Id read somehere that I needed to set a staic route up for the network connected via the WAN, i.e., the dsl router http://teek.info/guides/network/nat-dsl-modem/ but this appears to need not be the case.

I can now have at look at the dd-wrt features, as Ive never had any experience of it before... so happy days, just hope I can do all I wanted!!!