this are the tomato instruction. Transleted with google.


As promised, here is a quick step-by-step guide for beginners or. for those who know a little router configuration, namely, how to convert a trained udpxy IPTV multicast -> unicast traffic. Designed T-2 VDSL2 and FTTH users (again VDSL1 outage due to modem settings), for the other operators do not know. We must have a router that uses Linux. I will describe a combination of the Linksys WRT54GL router with Tomato firmwarom. In this paper I use the router IP address 192.168.1.1, which you must be amended if you otherwise. I used port 1234, you can change, but must be replaced everywhere.

First of all be configured on the router web interface:

1st Advanced -> Firewall -> Place a checkmark in "Allow multicast"and store
2nd Administration -> JFFS2 -> Place a checkmark in "Enable"and press the"Format / erase", then wait a minute, do not forget to save your settings by clicking the"Save"
3rd Administration -> Scripts -> Init -> in this window pastamo copy-script and store the following:

CODE: SELECT ALL
sleep 10
/jffs/udpxy -p 1234

4th Administration -> Scripts -> Firewall -> in this window pastamo copy-script and store the following:

CODE: SELECT ALL
iptables -A INPUT -p udp -m udp -d 224.0.0.0/4 -j ACCEPT

5th Then re-run ruter (Reboot in the left menu).

Then you must be prepared in any program udpxy http / ftp server, from where it will be passed on to ruter:

The program udpxy get here. After the transfer. Ipk file renamed. Tar and shipping with any tool for archiving, for example. 7-Zip, WinRAR, etc. Within these files go to the folder:

DATOTEKA\udpxy_1.0-Chipmunk-11_mipsel\.\data.tar.gz\data.tar\.\opt\bin\

... And extract the file from udpxy.

This file should upload to some server. I recommend T-2 freeweb may also Dropbox, etc..

Now we will connect the Telnet protocol ruter through and set everything necessary:

Telnetamo in Windows XP by going to Start -> Run -> telnet 192.168.1.1 and signing up (or change the IP address of your router IPjem). Windows 7 telnet client by default we have invested, that you can change the Windows Add or Remove features (in the Add or Remove Programs), or you simply pull down a little program PuTTY. Enter on IP from our router and connect. Username is root, password is the same as for access to the web interface. When you register the password length is not any indication of it, which is normal. Instead natipkamo and confirm with Enter.

Now we begin to enter the commands that are listed below with a brief explanation. After each command line entered on the certificate.

CODE: SELECT ALL
cd / jffs

With this we move to the directory / jffs.

CODE: SELECT ALL
wget [TITLE WHERE THE FILE udpxy]

eg. "Wget http://freeweb.t-2.net/test/udpxy In this way we pass the file to your ruter.

CODE: SELECT ALL
chmod 770 udpxy

With this program we give the necessary permissions to be able to start.

(If anyone is interested in the end you look at the pub, which also describes overclockanje router in the event that the streaming stutters while the rest of the http traffic, which can be done along the way.)

CODE: SELECT ALL
reboot

In this way we restarted ruter. Close the window and wait 1 minute to put back.

Efforts should be modified in playlisto programs that looks like this:

CODE: SELECT ALL
# EXTM3U
#EXTINF:0,POP TV
http://192.168.1.1:1234/udp/239.1.1.9:5000

# EXTINF: 0, Channel A
http://192.168.1.1:1234/udp/239.1.1.8:5000

...


If you have a different IP address as 192.168.1.1, is that appropriate changes in the playlist. I recommend that notepadu / WordPad / Word / ... Use the Find and replace function (Ctrl + H) to arrange in pairs playlisto seconds.

When after all this open a new playlisto, it should begin to play the same TV show as it was before the procedure, but with the difference that multicast traffic you will not be garbage Mon flax or slowed and even blocked a WLAN. Udpxy also has a status page that shows you information about what works. Located at: http://192.168.1.1:1234/status/

Additionally: Overclockanje procesorja of ruterja

It has been necessary in my case, that image remains liquid while the router is another route HTTP traffic. I myself find out the Linksys WRT54GL, which is overclockanje from 200 MHz to 250 MHz, safe and almost recommended (however, do it in a completely their own responsibility!). I also know that the ASUS WL-500gP has 264 MHz processor, which is why it is not advisable overclockati. Wound through telnet, as follows:

CODE: SELECT ALL
nvram set clkfreq=250

This command setting be increased to 250 MHz clock (Do not experiment with the numbers, if you do not know what you are doing!).

CODE: SELECT ALL
nvram commit

This command was setting "zapekli" that will remain even after restarting the router.

CODE: SELECT ALL
reboot

Reactivating the ruter. After about a minute to go places and see if it happens to burn. Fun.