OUR NETWORK:TiVo Community TechLore Explore3DTV DVRplayground Dijit Community See all... About UsAdvertiseContact Us

 
Learn about scoring Forum's Raw Score: 1.4147E7
August 3, 2011 01:22 PM

Categories: Tomato

Rating (3 votes)
  • 1
  • 2
  • 3
  • 4
  • 5
Rate This!

Member Avatar

Toastman

Member
Joined: 03/17/2011

August 3 2011

Toastman-RT-1.28.7479  
Toastman-VLAN-BETA-1.28.4402 (also includes VLAN-GUI)

DLNA updated to 1.0.21
HFS/HFS+ Mac OS x read support by Victek
SNMP integrated by Shibby

New filters added to qos-ctrate & detailed pages (Nice work by Teaman)
New cosmetics changes to many pages. This makes these pages extremely
useful for monitoring purposes.

Pages which may be used for realtime monitoring now have
the ability to "hide" much of the extra setup entry boxes, leaving
the page clearer for the lists.

WARNING - DHCP IS DISABLED BY DEFAULT. DON'T FORGET
TO TURN IT ON IF YOU NEED IT.

Website for donations:  http://www.toastmanfirmware.yolasite.com

http://www.toastmanfirmware.yolasite.com http://www.4shared.com/dir/v1BuINP3/Toastman_Builds.html

Discussion:    Add a Comment | Comments 101-125 of 148 | Latest Comment | « Previous 1 2 3 4 5 6 Next »

February 11, 2012 8:28 PM

Hello guys, can someone please teach me on how to download the toastman build firmware off the 4share website? i have tried many times but i can't avoid the billing page... isn't it a free download website? i have tried torrent too but no luck.. can someone please help me out here with a direct download link.
i have Asus RT-N16 currently running tomatousb v1.28.9054 MIPSR2-beta K26 USB vpn3.6 and i would really like to try the toastman version to see how great it is.
thank you very much~

March 11, 2012 5:34 AM updated: March 11, 2012 5:57 AM

although last post is one month old, but:
4shared.com is a free site if you are willing to wait 20 seconds for downloads.

here is the link in case you have wrong address or something:
http://www.4shared.com/dir/v1BuINP3/Toastman_Builds.html

http://www.4shared.com/get/9RDMGx1L/tomato-K26USB-12874962MIPSR2-T.html

i have a different issue. i think there is something wrong with the access restriction time settings. i tried to disable wifi from 23.00 to 07.30 but it didnt work. instead of my wifi turned off in the morning :) can anyone confirm that? i had to disable the rule to bring my wifi back :)

March 14, 2012 9:57 AM updated: March 14, 2012 10:26 AM

Main changes, Toastman 1.28.7494 onwards

  • Incoming QOS class bandwidth pie chart
  • IMQ based QOS ingress system - fix outgoing QOS prios increase HTB prios to 10 change class prio assignment
  • nvram defaults now country=SG, txpwr=0 (auto) just an attempt to find some better defaults, SG has few restrictions, txpower of "0" or "auto" is safe for all routers. Change if you wish.
  • Revert "Static ARP: option to enable all known devices" - some display bugfixes
  • add RTMPT filter (rtmp over http) - thanks to Porter
  • increase HTB prios, missed in previous commit
  • route modem IP for Static IP - add 600Mhz cpu freq - route modem IP - fix missed changes
  • change default QOS rules
  • Static ARP: minor improvement in the code
  • UDPxy: fixed symlink for udpxrec
  • Update to some timezones
  • EXPERIMENTAL Web UI for multiple virtual/guest WLANs (in VLAN builds)
  • Tools/System bugfix: command output was hidden inside the 'Notes' section'
  • fix dhcp options for non-VLAN builds
  • Fixed duplicated ipt_account(); (started twice)
  • 3G modem support (from branch tomato-shibby)
  • fixed typo in services.c
  • - fixed QOS ingress prios

March 9 2012 - 1.28.7496.2 and variants

  • USB detection, old scheme first
  • Fix libusb error (3G modem support)
  • Update miniDNLA to 1.0.24

WARNING - DHCP IS DISABLED BY DEFAULT.

DON'T FORGET TO TURN IT ON IF YOU NEED IT.

TO DO THAT, YOU MUST SET A FIXED IP ON YOUR PC.

http://www.toastmanfirmware.yolasite.com http://www.4shared.com/dir/v1BuINP3/Toastman_Builds.html

March 14, 2012 10:14 AM updated: March 20, 2012 5:52 AM

|

To recap:

The new IMQ ingress system for Tomato is now complete and working well.

The maximum bandwidth setting is now a real limit, and no longer just used to calculate class percentage bandwidths.

The incoming QOS section now has both rates and limits, similar to the outgoing section. The classes now have priorities. When set up correctly, lower priority classes will be dropped first, allowing higher classes to use bandwidth instead. Tomato now makes much better use of the available bandwidth. You must experiment with the system now to see how it behaves differently than before.

Set both incoming and outgoing limits to your measured bandwidth less 15%. For best VOIP response, (and maybe games), make that less 33% and then experiment to find a compromise after you've got it working well.

T.

http://www.toastmanfirmware.yolasite.com http://www.4shared.com/dir/v1BuINP3/Toastman_Builds.html

March 19, 2012 5:49 PM

few days ago i wrote:

i think there is something wrong with the access restriction time settings. i tried to disable wifi from 23.00 to 07.30 but it didnt work. instead of my wifi turned off in the morning :)

... and all that because i live in Europe and my time zone was set to Brazil Embarassed everything seems to be working ok now Smile

mea culpa

March 20, 2012 5:13 AM updated: April 13, 2012 12:27 AM

|

New Release - 1.28.7497 & variants

This release sees the addition of PPTP Server & GUI by Teaman. There's also a web GUI to configure and monitor active connections to the PPTP server.

Support for WNR3500L V2 added 28 March 2102

- Minor multiLAN/wireless bugfixes

- MultiSSID: fixes saving WL VIF settings when net mode is 'n-only' (5GHz radios)

- Syslogd custom path improvements - rc: preserve /var/log/messages if it's a file at syslogd restart if we have a custom path set, check if it's a symlink (and remove/recreate it if necessary)

- PPTP Server for Tomato (Ext, VPN Builds) - by Teaman

this commit possibly introduces some bugs, but here we go!

this version allows up to 6 IPs/users/concurrent connections (ppp4-ppp9)

broadcast relay has been included on the webUI, but hasn't been thoroughly tested

- PPTPD: MPPE and compile bugfixes (batch #1)

Attempt to fix some random decryption errors causing connections to become unusable. Clients had to disconnect/reconnect manually to fix the problem once it started to happen. The issue seems to be related with some parameters/settings being negotiated between clients and the PPTP server. Hopefully, these changes should prevent these problems from happening. See commit 3ef7e67858ecff04caf8197e381fa8b7c68c668e. Also, this commit should fix some build/compilation issues when merging this code into other branches

- PPTPD: move webUI pages into 'VPN Tunneling' menu

Teaman's Website, Screenshots:

http://code.google.com/p/tomato-sdhc-vlan/

http://code.google.com/p/tomato-sdhc-vlan/wiki/PPTPVPNServer

Some references:

http://tomatousb.org/tut:configuring-a-pptp-vpn

http://www.linksysinfo.org/index.php?threads/the-pptp-gui-thread.36779/#post-179904

http://tomatousb.org/forum/t-373620

http://abills.net.ua/wiki/doku.php/abills:docs:linux:accel_pptp:ru

http://accel-pptp.sourceforge.net/

http://service.asus.com/demoui/RT-N66U/RT-N66U/RT-N66U/192.168.1.1/Advanced_PPTP_Content.html

http://pptpclient.sourceforge.net/howto-diagnosis.phtml

http://www.dd-wrt.com/wiki/index.php/Static_PPTP_VPN_Client

https://discussions.apple.com/thread/2778039?start=75&tstart=0

http://quozl.linux.org.au/pptp/pptpd.conf.5.html

http://www.linksysinfo.org/index.php?threads/tomato-with-pptp-and-snmp-support.26980/

WARNING DHCP IS DISABLED BY DEFAULT. DON'T FORGET TO TURN IT ON IF YOU NEED IT.

SET A FIXED IP ON YOUR PC TO ACCESS THE ROUTER.

PLEASE DO NOT FLASH 60K NVRAM VERSIONS ON TO ROUTERS OTHER THAN THOSE WHICH THEY ARE INTENDED FOR. THEY WILL SHOW 60K IN THE DISPLAY BUT YOU WILL USUALLY BRICK THE ROUTER IF YOU TRY TO ACTUALLY USE MORE THAN 32K. DO THIS AT YOUR OWN RISK!!!

http://www.toastmanfirmware.yolasite.com http://www.4shared.com/dir/v1BuINP3/Toastman_Builds.html

March 22, 2012 3:11 PM

Thanks Toastman for pointing me to the right thread.

What capabilities are in the router / software that can be used to monitor my LAN traffic.

I'm guessing none, if much of the traffic will stay on the switches - which are of course cheap unmanaged switches...

Just looking for ways to figure out why some of my xboxes are having issues with getting data streams from the media center server...

John

March 23, 2012 9:56 AM updated: March 28, 2012 9:33 AM

Per-IP traffic monitor was added a while back. However, it won't be able to monitor any local traffic that doesn't pass through the router (i.e. goes via the switch only).

http://www.toastmanfirmware.yolasite.com http://www.4shared.com/dir/v1BuINP3/Toastman_Builds.html

March 28, 2012 9:29 AM

Build for WNR3500L V2 added to the RT-N branch, 1.28.0497.1 standard and vlan builds.

Known bugs:

NVRAM display shows 32K/32K

http://www.toastmanfirmware.yolasite.com http://www.4shared.com/dir/v1BuINP3/Toastman_Builds.html

March 28, 2012 1:26 PM

Awesome! I'll be uploading these builds to the community shortly.

Peter Redmer
Administrator
Blog | Twitter

March 29, 2012 7:56 AM updated: March 29, 2012 10:39 AM

Toastman said: Per-IP traffic monitor was added a while back. However, it won't be able to monitor any local traffic that doesn't pass through the router (i.e. goes via the switch only).

Hmm. Well, that is one step in the right direction though... so I can shove my kids face in it when he denies that he's abusing our internet connection!

So I guess a managed/smart switch placed right after the ROUTER is my only option for "LAN" traffic?

Oh - and a question -

Can I backup and restore my settings from my existing version?  I sure as hell don't want to have to reconfigure all the options...

March 29, 2012 3:40 PM

Hey Toastman, i updated my router today to 1.28.7497.1 VPN. Everything went fine except for the daylight saving option, my timezone is UTC +01:00 currently with daylight saving which should add one hour. On the 25th of March at 02:00 AM daylight saving became active, but with the correct settings my router is currently one hour behind. I guess that the timezone data is outdated?

March 29, 2012 3:47 PM

http://www.linksysinfo.org/index.php?threads/bug-auto-daylight-savings-time-n...

March 30, 2012 12:06 AM updated: March 31, 2012 10:28 AM

bigjohn, You may be able to use the router with old config but it is generally better to erase and reconfigure after flashing. Here's an easy way to do it:

http://www.linksysinfo.org/forums/showpost.php?p=362345&postcount=221

http://www.linksysinfo.org/index.php?threads/common-tomato-topics-help-inform...

http://www.toastmanfirmware.yolasite.com http://www.4shared.com/dir/v1BuINP3/Toastman_Builds.html

March 30, 2012 1:43 AM

kt_haddock said: http://www.linksysinfo.org/index.php?threads/bug-auto-daylight-savings-time-n...
Thanks for your answer! :)

March 31, 2012 12:25 PM updated: March 31, 2012 12:49 PM

Hi Toastman,
I recently bought 2 asus rt-n12b1 routers, which want to replace the old rt-n11(no custom firmware can load) and a wl-500gx(lower speed, now with k26 USB 1.28.9054 lite beta), used to link by AP+WDS way of 2 buldings of 10M length, no problem just slower.but...
I have tried all your builds for rt-n12b1, RAF's 079, Shibby's, Oleg's and dd-wrt's builds but all fail to have a stable wireless link at both rt-n12b1 routers, seems not more than 30 minutes, the clint router of rt-n12b1 will become only have tx but no rx flow, set to 20 MHz will last longer than 40 MHz, Shibby's build after setup to be an AP+WDS will brick after reboot, need to be restore firmware, but if I use 1 of rt-n12b1 as a server AP+WDS to link with n-11(hybrid mode) or wl-500gx as clint AP+WDS and they both work fine, except the n12b1 linking each other, any advice? Please help me to solve this problem, BTW, I like your builds, rest functions work fine and thank you in advance.

March 31, 2012 12:51 PM

The fact that all of those different firmware builds fail, even those from Oleg which are quite different to Tomato, is worrying me a little. I don't have one of those routers, but something seems to be fundamentally wrong. This won't make you any happier, but reading through the different forums I see a lot of problems reported with those routers.

I'd suggest you post your queries on Linksysinfo.org - there are many Asus users there who might help, this forum is for Netgear primarily.

http://www.toastmanfirmware.yolasite.com http://www.4shared.com/dir/v1BuINP3/Toastman_Builds.html

March 31, 2012 1:08 PM

Hi Toastman,
Thanks a lot for your advice, I will post this queries to another forum for asking help.
Best Regards.

March 31, 2012 1:26 PM

Toastman said: bigjohn, You may be able to use the router with old config but it is generally better to erase and reconfigure after flashing. Here's an easy way to do it: http://www.linksysinfo.org/forums/showpost.php?p=362345&postcount=221 http://www.linksysinfo.org/index.php?threads/common-tomato-topics-help-inform...

Thanks.

I'll have to give that a try.  Whats your recommended build? I use USB for a hard drive, and would like the per IP bandwidth monitoring capability.

I think for the other side of my problem - watching whats happening ON LAN with my media center - is going to require me to put in some sort of smart-switch... (any recommendations?)

May 21, 2012 11:56 AM

Hi Toastman,i really appreciate your hard work on this firmware and i have a request for ya,can you pls add a transmission client  onto your next firmware release?thanx

May 21, 2012 11:56 AM

Hi Toastman,i really appreciate your hard work on this firmware and i have a request for ya,can you pls add a transmission client  onto your next firmware release?thanx

May 21, 2012 12:08 PM

@Mattia

You can use Shibbys build, he have that built in.
http://tomato.groov.pl/index.php

May 21, 2012 12:32 PM

kt_haddock said: @Mattia You can use Shibbys build, he have that built in.http://tomato.groov.pl/index.php

Yeh ive already flashed my router with the latest firmware,but when it is highly busy e.g torrent or streaming,the signal drops and im forced to reboot the router,i dont think it's due to hardware,

May 21, 2012 12:36 PM

what is a "transmission client"??

May 21, 2012 12:40 PM

bigjohn said: what is a "transmission client"??
my bad,i meant torrent client called transmission or something like that

Discussion:    Add a Comment | Back to Top | Comments 101-125 of 148 | Latest Comment | « Previous 1 2 3 4 5 6 Next »

Add Your Reply

(will not be displayed)

Email me when comments are added to this thread

 
 

Please log in or register to participate in this community!

Log In

Remember

Not a member? Sign up!

Did you forget your password?

You can also log in using OpenID.

close this window
close this window