Previous Thread
Okey, If you already using it why do you need another one ?
August 3 2011
Toastman-RT-1.28.7479
Toastman-VLAN-BETA-1.28.4402 (also includes VLAN-GUI)
DLNA updated to 1.0.21
HFS/HFS+ Mac OS x read support by Victek
SNMP integrated by Shibby
New filters added to qos-ctrate & detailed pages (Nice work by Teaman)
New cosmetics changes to many pages. This makes these pages extremely
useful for monitoring purposes.
Pages which may be used for realtime monitoring now have
the ability to "hide" much of the extra setup entry boxes, leaving
the page clearer for the lists.
WARNING - DHCP IS DISABLED BY DEFAULT. DON'T FORGET
TO TURN IT ON IF YOU NEED IT.
Website for donations: http://www.toastmanfirmware.yolasite.com
http://www.toastmanfirmware.yolasite.com http://www.4shared.com/dir/v1BuINP3/Toastman_Builds.html
May 21, 2012 12:51 PM
I need it on a stable firmware,with this FW as i told you on previous posts,wifi keeps dropping on high usage,that's all,toastman's one seems to be more stable
May 21, 2012 1:11 PM
I doubt you can get better performance with toastmans builds as they use same code base to theirs builds. If your torrent drop connection check your settings.
Bit torrent DNA, DHT - UDP bandwidth hogging
http://www.linksysinfo.org/forums/showpost.php?p=338069&postcount=24
June 8, 2012 3:37 PM
updated: June 8, 2012 3:38 PM
1.28.7499 and variants
NB - until these are tested consider them as BETA builds !!
IP Traffic: Fix JS error causing initial load delay when default nvram 'tomato' skin
ash: fix execution of shell scripts without shebang
PPPoE Status Progress - overview page
add PPTPD to ext builds
dropbear: 2012.55 update
dnsmasq: 2.61 update
reinstate BW Limiter, but presently with no default limits for unlisted clients.
add SNMP configuration options for custom port and remote access
fixed "ug" bug (Thanks JYAvenard)
Support for Asus RT-N53 (Thanks Shibby)
Support for new Linksys E-series routers (Thanks to @tvlz and to Shibby)
- E1000v2/2.1
- Cisco M10v2
- E900
- E1200v1
- E1200v2
- E1500
- E1550
- E2500
- E3200
WARNING
DHCP IS DISABLED IN MY BUILDS BY DEFAULT.
PLEASE SET A FIXED IP ON YOUR PC BEFORE FLASHING NEW FIRMWARE.
DON'T FORGET TO TURN DHCP ON IF YOU NEED IT.
http://www.toastmanfirmware.yolasite.com http://www.4shared.com/dir/v1BuINP3/Toastman_Builds.html
June 29, 2012 7:11 PM
Random stupid question...
is there any firmware that I can turn one of the LAN ports into a 2nd wan port to have 2 WAN (ISP) connections and load balance them / route preferred traffic / have a backup route?
July 25, 2012 6:54 AM
Strange. I can't see any files listed for Toastman's builds on his 4shared page. The directories are all there, but I can't list any files inside them.
I've tried several different browsers & few different OS's. Anyone else able to download latest builds?
Administrator
- member since: 01/02/2008
- rank: 2 of 30047
- 50 articles authored
- 5 blog entries posted
- 96 forum threads started
- 272 comments
July 25, 2012 11:51 AM
@LilTimmy--I had just updated the WNR3500Lv1 builds to the latest version on 7/16, but when I try to access his 4shared site now, I am seeing the same issue. I'll message him and see what's up.
July 25, 2012 2:23 PM
Peter Redmer said: @LilTimmy--I had just updated the WNR3500Lv1 builds to the latest version on 7/16, but when I try to access his 4shared site now, I am seeing the same issue. I'll message him and see what's up.Thx Peter..really appreciate it.
Administrator
- member since: 01/02/2008
- rank: 2 of 30047
- 50 articles authored
- 5 blog entries posted
- 96 forum threads started
- 272 comments
July 25, 2012 2:48 PM
According to Toastman, the 4shared server seems to me acting strangely, and he thinks all will be well in a few days. He says it's happened before, but that they address it quickly.
In the meantime, he's uploaded the latest builds here:
http://www.mediafire.com/?88t1vzzcgrphx
July 31, 2012 4:27 PM
updated: July 31, 2012 4:28 PM
Currently i use a VDSL2 modem/router which i received from my provider, but i want to use my Netgear 3500L v1 again because the wifi performance is way better. But i want to know if i can use IPV6 6RD with the latest TomatoUSB build (1.28.7500.2)?
August 15, 2012 5:19 PM
Quick question: does the August 15 E4200 release (1.28.0500.4) contain the updated wireless drivers (namely 5.100.138.20, courtesy ASUS)?
August 16, 2012 4:55 AM
Aqualung said: Quick question: does the August 15 E4200 release (1.28.0500.4) contain the updated wireless drivers (namely 5.100.138.20, courtesy ASUS)?Yes it does
August 16, 2012 8:15 AM
kt_haddock said:Thanks. Would be nice to reflect that in the change log though...Aqualung said: Quick question: does the August 15 E4200 release (1.28.0500.4) contain the updated wireless drivers (namely 5.100.138.20, courtesy ASUS)?Yes it does
August 17, 2012 3:46 PM
Please advise:
I have TomatoUSB running on an E3000 and I love it. While I attend school away from home, I am running an Asus RT-N12B1 and I have tried and tried to flash TomatoUSB. The Asus firmware is interesting but clunky; dd-wrt is good, but not great. Every time I try to flash Tomato, I cannot log into my router.
Perhaps I'm using the wrong version of Tomato. By the way, the B1 version of the N12 has 8MB of flash, so I should be able to use a standard version, right?
Oh--and check out how my processor is reported:
root@DD-WRT:~# ffcat /proc/cpuinfo
system type : Broadcom BCMD144 chip rev 1
processor : 0
cpu model : MIPS 74K V4.9
BogoMIPS : 149.91
wait instruction : no
microsecond timers : yes
tlb_entries : 32
extra interrupt vector : no
hardware watchpoint : yes
ASEs implemented : mips16 dsp
shadow register sets : 1
VCED exceptions : not available
VCEI exceptions : not available
dcache hits : 2147483648
dcache misses : 4294966784
icache hits : 2147483648
icache misses : 4294967166
instructions : 2147483648
-------------
That's not the standard processor for the RT-N12 (or B1), is it?
Thanks,
Paul
November 1, 2012 6:50 PM
updated: November 3, 2012 1:45 PM
Hi all, I've been using toastman's version for a few months now and started trying to "play" with the IPv6 tunnel features, using HE tunnel broker site. I created two tunnels, one for my Netgear WNR3500L/U/v2 with toastman's tomato 1.28 and one for my Linksys WRT400N with DD-WRT v24-sp2 (08/07/10) std - build 14896.
Both tunnels works, that is I can ping6/traceroute6 etc, even the test-ipv6.com website show 10/10 in all tests with both tunnels,
but there is something wrong with local bind/named queries when connected to the HE tunnel thru the netgear, I am getting these kind of errors and no resolution whatsoever:
Nov 1 19:02:24 Legolas named[10052]: error (FORMERR) resolving './NS/IN': 192.228.79.201#53
Nov 1 19:02:24 Legolas named[10052]: DNS format error from 192.58.128.30#53 resolving ./NS: non-improving referral
Nov 1 19:02:24 Legolas named[10052]: error (FORMERR) resolving './NS/IN': 192.58.128.30#53
Nov 1 19:02:26 Legolas named[10052]: DNS format error from 192.33.4.12#53 resolving ./NS: non-improving referral
Nov 1 19:02:26 Legolas named[10052]: error (FORMERR) resolving './NS/IN': 192.33.4.12#53
Nov 1 19:02:26 Legolas named[10052]: DNS format error from 193.0.14.129#53 resolving ./NS: non-improving referral
Nov 1 19:02:26 Legolas named[10052]: error (FORMERR) resolving './NS/IN': 193.0.14.129#53
Nov 1 19:02:27 Legolas named[10052]: DNS format error from 202.12.27.33#53 resolving ./NS: non-improving referral
Nov 1 19:02:27 Legolas named[10052]: error (FORMERR) resolving './NS/IN': 202.12.27.33#53
and it only happens when I use the root hints directly, if I use a forwarder, the named successfully does the name resolution.
when I switch to the linksys, with dd-wrt, the named does not logs any errors and is able to resolve the same hosts, in similar conditions, that is, using root hints, no forwarder.
I tried with an MTU of 1480, 1460 and now it is at 1280 as the dd-wrt and still getting those errors and no resolving when using the netgear with toasman's tomatousb... dont know what else to look at.
btw, in toastman's I opened ports 53 and 41 tcp , first without target IP, which caused get several warnings for blocking from the test-ipv6.com, but when directed to my specific IPv6 address, it all worked fine. I opened port 41 for all crossing traffic with ip6tables.
I dont know where else to post this request for help, so if this is the wrong place, please point me to the right direction.
have anyone faced this situation? where should I start digging ?
thanks in advance.
November 11, 2012 1:43 PM
Guys, I just noticed that my 5GHz band is not working. I'm on a Linksys E4200 w/Toastman Tomato 1.28.0500.5 (tomato-E4200USB-NVRAM60K-1.28.0500.5MIPSR2Toastman-RT-N-VPN). Can anyone confirm?
January 23, 2013 4:53 AM
Will there be a build of tomato made for the Netgear R6300 would love to use it prefer it over stock firmware dd-wrt or openwrt
January 23, 2013 3:40 PM
Is there an easy way to enable a guest wifi network using multiple ssid? I can't find any configuration options in the GUI, but i do see mentions about it in the changelog. I'm using the latest VPN build (1.28.7501.2).
January 23, 2013 3:45 PM
Yes it is. Have you looked under Virtual Wireless => Virtual Wireless Interfaces ?
January 23, 2013 4:00 PM
I've set up a virtual wireless interface for guest access (as a test), but the guest network could ping and see my primary (secured) network.
I tried IP Isolation with no success.
If you figure it out, please post your procedure / technique here.
Thanks!
-Paul
January 23, 2013 4:04 PM
kt_haddock said: Yes it is. Have you looked under Virtual Wireless => Virtual Wireless Interfaces ?There is no Virtual Wireless option, i googled a bit and it should be under 'Advanced' but it isn't there.
January 23, 2013 4:31 PM
updated: January 24, 2013 7:10 AM
Well then erase NVRAM and reconfigure by hand. I'm sure it's there.
I'm using 0501.2 and it's there.
January 24, 2013 2:10 AM
kt_haddock said: Well then erase NVARAM and reconfigure by hand. I'm sure it's there. I'm using 0501.2 and it's there.I already erased the NVRAM when i flashed, believe me, it aint there. :P
Add Your Reply
Sponsored Links
Copyright © 2013
Capable Networks LLC.. All Rights Reserved.
RSS |
Privacy Policy |
Advertise With Us |
Terms of Use |
About Us |
Contact Us |
Site Map
Our Capable Community Network:
DVR playground |
Explore3DTV |
MediaSmart Home |
My Open Router |
DijitCommunity |
Robo Community |
Sansa Community |
TechLore |
TiVo Community
MyOpenRouter.com is not affiliated with NETGEAR®. NETGEAR is a registered trademark of NETGEAR, Inc. in the United States and/or other countries. Other brand names mentioned herein are for identification purposes only and may be trademarks of their respective holder(s). © 2011 NETGEAR, Inc. All rights reserved.
