MyOpenRouter - DD-WRT

How to convert WGR614L (DD-WRT firmware) from AP to repeater mode

achilles — Mon, 20 Oct 2008 11:32:54 GMT

Hi All, I have installed the latest DD-WRT firmware on my WGR614L and now I want to test my router for repeater mode . Could anyone please tell me how can I configure my AP to repeater or client bridge . Thanks in advance ,

Seeing my VOIP router through the wireless DD-WRT

wagoneer89 — Thu, 16 Oct 2008 03:11:11 GMT

I've got a VOIP RT31P2 Linksys that is the gateway at 192.168.15.1, just as it was sent to me by the VOIP provider. I've set up a WRT54GS, running DD-WRT, behind it, which is working as a wireless AP. At some point during this setup I was able to connect to the gateway through the wireless router to change settings without having to plug the Ethernet directly into the gateway. Although everything is working, otherwise, I have lost that ability. When I connect Firefox to 10.10.15.1, I see the setup page on the wireless DD-WRT, when I try to connect to the gateway at 192.168.15.1 I get "page cannot be displayed". When I ping 192.168.15.1 it's there in all it's glory. Am I correct that this isn't a RT31P2 gateway problem? I've got my firewall in the Vista computer off, as usual. What info do I need to provide to the forum to make this situation clear? What might I have missed? Thanks. Bill

DD-WRT v10509 Std/Small Test Build (BIN) for WGR614L

Eko — Wed, 15 Oct 2008 14:58:03 GMT

Updated test build of DD-WRT for North American versions of the NETGEAR WGR614L open source router, in BIN format. Reported to resolve issues with blinking lights, resetting issues, etc.

DD-WRT v10509 Std/Small Test Build (CHK) for WGR614L

Eko — Wed, 15 Oct 2008 14:57:51 GMT

Updated test build of DD-WRT for North American and European versions of the NETGEAR WGR614L open source router, in CHK format. Reported to resolve issues with blinking lights, resetting issues, etc.

How can I get source code for DD-WRT V24-SP1

achilles — Wed, 15 Oct 2008 13:49:05 GMT

Hi all, could any one please provide me the link from where I can get the source for DD-WRT V24-SP1 .... I have tried several times to get it from svn://svn.dd-wrt.com but no luck ..... Please help me out of this ...

How to compile DD-WRT for WGR614L

achilles — Wed, 15 Oct 2008 10:44:58 GMT

Hi all, I am trying to compile DD-WRT for router WGR614L . Could anyone please tell me what are the steps that I need to take ? Thanks in advance,

Replacing Tomato with DD-WRT

ka5j — Mon, 13 Oct 2008 15:15:48 GMT

I have Tomato v1.11 on my WGR614v8 router. I have a client interested in using access control to limit some workstations to around 50 approved websites and it looks like the access rules will work better than in Tomato which appears you can only add sites to deny access to. Should I reset the router back to the default Netgear firmware, then to DD-WRT to be safe?

Need Advise

terrorpup — Mon, 06 Oct 2008 15:53:59 GMT

Ok, please please bear with me. I been fight with my ips and ATT to get my network back up. Background I had DSL. The company I am with, started me out on a ADSL that they set up with my block of ip's. I have 16. 13 that I can use. One lost to Network, Boardcast, and the gateway. On friday, I move from my old little house to my new big house which has IFITL (Integrated Fiber In The Loop Because of this, I can't no longer use my modem. I had to purchase the netgear router because it support PPPoE, no problem, most due. Here where the problem because. I can connect to my ISP and I get my WAN ip, and I can get out, because NAT'ing is turn on, but I can't get in. I can't ping my GATE. No If I turn NAT'ing off I can't get in or out. Problem Let me explain a bit about my network, I hope this helps and doesn't confuse everyone. I will change the ip's for safety reason. But you should be able to follow along. My router is a Linksys, it might be the problem. I...