http://www.myopenrouter.com?src=forumtopic_rss MyOpenRouter - DD-WRT Forum Thu, 09 Feb 2012 16:36:40 GMT admin@myopenrouter.com MyOpenRouter 60 http://www.myopenrouter.com/brand/router/community.gif http://www.myopenrouter.com?src=forumtopic_rss http://www.myopenrouter.com/forum/thread/35682/iptables-resetted-every-60-minutes/?src=forumtopic_rss Hi, I have WNR3500L router with DD-WRT v24-sp2 (08/12/10) mega(SVN revision 14929). The "issue" I have is that iptables is resetted every 60 minutes. If I manually add a new rule by sshing to the box and typing the "iptable -A" command, it will be removed after 60minutes. Why ? How is this reset triggered ? Is it possible to disable this "feature" ? In the message file, every hour, I find a bunch of lines of module unload/load + restart of the process_monitor+restart of WLAN daemon. The first line is always "Feb 8 21:01:34 plouf user.info syslog: vpn modules : vpn modules successfully unloaded" # grep "process_monitor successfully started" messages Feb 8 17:01:40 plouf user.info syslog: process_monitor successfully started Feb 8 18:01:36 plouf user.info syslog: process_monitor successfully started Feb 8 19:01:41 plouf user.info syslog: process_monitor successfully started Feb 8 20:01:37 plouf user.info syslog: process_monitor successfully started Feb 8 21:01:34 plouf user.info syslog: process_monitor successfully started I can't find anything in the crontab. Can someone try following the command (syslog must be enabled...): Code: grep "process_monitor successfully started" /var/log/messages And tell me if I'm the only one with this periodic reset or if it's a normal behavior of the system....<div><a href="http://www.myopenrouter.com/forum/thread/35682/iptables-resetted-every-60-minutes/">[Read more]</div> DD-WRT Thu, 09 Feb 2012 16:36:39 GMT redge http://www.myopenrouter.com/forum/thread/35682/iptables-resetted-every-60-minutes/#discussion?src=forumtopic_rss http://www.myopenrouter.com/forum/thread/35682/iptables-resetted-every-60-minutes/?src=forumtopic_rss http://www.myopenrouter.com/forum/thread/35558/how-to-upgrade-firmware-from-.bin-to-.chk/?src=forumtopic_rss my router is WNDR3300&#65292;i upgrade firmware with .bin file,now ,i want to upgrde to .chk,but can't.how can i do ?thx<div><a href="http://www.myopenrouter.com/forum/thread/35558/how-to-upgrade-firmware-from-.bin-to-.chk/">[Read more]</div> DD-WRT Mon, 06 Feb 2012 13:27:35 GMT BuyNetGe.net http://www.myopenrouter.com/forum/thread/35558/how-to-upgrade-firmware-from-.bin-to-.chk/#discussion?src=forumtopic_rss http://www.myopenrouter.com/forum/thread/35558/how-to-upgrade-firmware-from-.bin-to-.chk/?src=forumtopic_rss http://www.myopenrouter.com/forum/thread/35548/compilation-of-DD-wrt-source-for-.bin-or-.chk-file/?src=forumtopic_rss Hi everyone, I want to .bin, .chk file of dd-wrt for my netgear wnr 3500L. For that i follow this steps. 1. svn checkout svn://svn.dd-wrt.com/DD-WRT/src/linux/brcm/linux-2.6.23 -r 14929 2. cd /opt 3. wget http://www.dd-wrt.com/dd-wrtv2/downloads/others/sourcecode/toolchains/current-toolchains.tar.bz2 4. tar jxvf current-toolchains.tar.bz2 5. # grep -v madwifi drivers/net/wireless/Kconfig &gt; drivers/net/wireless/Kconfig.new # mv drivers/net/wireless/Kconfig{.new,} # # rm include/linux/config.h # # echo "#define JHASH_GOLDEN_RATIO 0x9e3779b9" &gt;&gt; include/linux/jhash2.h 6. # cp .config_std .config # make menuconfig # PATH=$PATH:/opt/toolchain-mipsel_gcc4.1.2/bin make modules 7. make After 7th step i got one binary file "vmlinuz". When i am uploading to my web GUI of DD-wrt, than its showing "Upgrade failed". I do not know why. Help me out already post question in DD-wrt fourm http://www.dd-wrt.com/phpBB2/viewtopic.php?t=150715 Thanks a lot....<div><a href="http://www.myopenrouter.com/forum/thread/35548/compilation-of-DD-wrt-source-for-.bin-or-.chk-file/">[Read more]</div> DD-WRT Mon, 06 Feb 2012 04:38:05 GMT newbie123 http://www.myopenrouter.com/forum/thread/35548/compilation-of-DD-wrt-source-for-.bin-or-.chk-file/#discussion?src=forumtopic_rss http://www.myopenrouter.com/forum/thread/35548/compilation-of-DD-wrt-source-for-.bin-or-.chk-file/?src=forumtopic_rss http://www.myopenrouter.com/forum/thread/35483/ipkg-or-opkg/?src=forumtopic_rss hello, I have asus RT N-16 running kingkong 18050 build. I am having trouble installing optware. Which method should i use ipkg or opkg. Ipkg tutorial in ddwrt is obsolete and only supports kernel 2.4 i guess. well i want to install the optware from this feed which is fairly updated http://ipkg.nslu2-linux.org/feeds/optware/ddwrt/cross/stable/ how to proceed ? I tried installing http://downloads.openwrt.org/backfire/10.03.1-rc6/brcm47xx/packages/libgcc_4.3.3+cs-43.29_brcm47xx.ipk http://downloads.openwrt.org/backfire/10.03.1-rc6/brcm47xx/packages/uclibcxx_0.2.2-3_brcm47xx.ipk ipkg.conf shows these src whiterussian http://downloads.openwrt.org/whiterussian/packages />src non-free http://downloads.openwrt.org/whiterussian/packages/non-free />src backports http://downloads.openwrt.org/backports/rc5 />dest root /jffs dest mmc /mmc dest smbfs /tmp/smbshare dest ram /tmp I dont have jffs as i have a usb storage. Why it is still whiterussian ? Or opkg will just do fine for me if someone please guide me what to do and how can i install opkg packages since there is no tutorial &amp; i am a novice. Kong &amp; other gurus please respond.. Thanks<div><a href="http://www.myopenrouter.com/forum/thread/35483/ipkg-or-opkg/">[Read more]</div> DD-WRT Fri, 03 Feb 2012 22:36:05 GMT hellbound1988 http://www.myopenrouter.com/forum/thread/35483/ipkg-or-opkg/#discussion?src=forumtopic_rss http://www.myopenrouter.com/forum/thread/35483/ipkg-or-opkg/?src=forumtopic_rss http://www.myopenrouter.com/forum/thread/35431/WNR3500L-with-DD-WRT-stopped-working-after-1-year/?src=forumtopic_rss hello, something very unusual has happened to me. my router stopped working for no reason after more then 1 year. i have not changed any setting for over 6 months. as i was using DD-WRT (not sure which version) i am wondering if it is possible to rescue this router. has another user experienced similar oddity? thanks,<div><a href="http://www.myopenrouter.com/forum/thread/35431/WNR3500L-with-DD-WRT-stopped-working-after-1-year/">[Read more]</div> DD-WRT Thu, 02 Feb 2012 10:14:29 GMT nicolasd http://www.myopenrouter.com/forum/thread/35431/WNR3500L-with-DD-WRT-stopped-working-after-1-year/#discussion?src=forumtopic_rss http://www.myopenrouter.com/forum/thread/35431/WNR3500L-with-DD-WRT-stopped-working-after-1-year/?src=forumtopic_rss http://www.myopenrouter.com/forum/thread/35380/Can-t-connect-via-remote/?src=forumtopic_rss Not sure why but I can't access any system on my network via Remote Desktop . Either by using my ip address or DynDNS. I've tried adding ports 3389 and 3390 in my Windows firewall as well as port forwarding these same ports. I've also copied all my old ports from my old Linksys to my Netgear 3700 and had no problems when using the old Linksys. What am I missing?<div><a href="http://www.myopenrouter.com/forum/thread/35380/Can-t-connect-via-remote/">[Read more]</div> DD-WRT Wed, 01 Feb 2012 00:26:54 GMT Beerman http://www.myopenrouter.com/forum/thread/35380/Can-t-connect-via-remote/#discussion?src=forumtopic_rss http://www.myopenrouter.com/forum/thread/35380/Can-t-connect-via-remote/?src=forumtopic_rss http://www.myopenrouter.com/forum/thread/35230/How-to-install-packages/?src=forumtopic_rss Hello, I have asus RT n-16 running king kong build 18050. I can see a folder asterisk in /etc folder. Is asterisk already installed if yes what version is it ? I want to configure asterisk from gui. I also want to install- ADOS Rutorrent SDC++ server amule utorrent pls let me know how to proceed. Thanks<div><a href="http://www.myopenrouter.com/forum/thread/35230/How-to-install-packages/">[Read more]</div> DD-WRT Thu, 26 Jan 2012 07:09:29 GMT hellbound1988 http://www.myopenrouter.com/forum/thread/35230/How-to-install-packages/#discussion?src=forumtopic_rss http://www.myopenrouter.com/forum/thread/35230/How-to-install-packages/?src=forumtopic_rss http://www.myopenrouter.com/forum/thread/35198/Can-the-Big-Build-connect-to-a-vpn-and-be-a-dlna-server/?src=forumtopic_rss Hello I am planning on buying the netgear wnr3500l would like to know if the ddwrt big build support dlna and vpn client well or does it have issues? has anyone had any experience with these two features do they work as they should?? Thank you (sorry for posting a simular thread but I cant seem to find any answers about this)<div><a href="http://www.myopenrouter.com/forum/thread/35198/Can-the-Big-Build-connect-to-a-vpn-and-be-a-dlna-server/">[Read more]</div> DD-WRT Wed, 25 Jan 2012 11:47:42 GMT Lean http://www.myopenrouter.com/forum/thread/35198/Can-the-Big-Build-connect-to-a-vpn-and-be-a-dlna-server/#discussion?src=forumtopic_rss http://www.myopenrouter.com/forum/thread/35198/Can-the-Big-Build-connect-to-a-vpn-and-be-a-dlna-server/?src=forumtopic_rss http://www.myopenrouter.com/forum/thread/35177/Linksys-E3000-file-transfer-too-slow.-18050-usb-ftp-samba-dlna/?src=forumtopic_rss Hello all! I have installed this firmware usb-ftp-samba3-dlna-nv60k-broadcom.bin (v1850) on my Linksys E3000. I have enabled the usb support and samba server, I have plugged an hard disk with 320GB(a sata hard disk in a usb box) self-powered by usb, with ext2 filesystem and automount on /jffs, the samba works but the file transfer is very slow: about 2,5-3 MB/s with ethernet or wireless and often the transfer of large files hangs!(exp of large files: 100MB,700MB,800MB,1.2GB etc..) and the router crashes and I need to reboot the router by unplugging the router power chord. The usb bandwith is 480 Mbit/s = 60MB/s the 5GHz antenna of linksys E3000 with "n" is 300 Mbit/s = 37,5 MB/s the 2,4 GHz antenna with 'n-g mixed' is about 140 Mbit/s = 17,5 MB/s the ethernet is 100/1000 Mbit/s = 12,5MB/s / 125 MB/s but with ethernet or 5GHz "n" or 2,4GHz "g-n mixed" I have about 2,5-3 MB/s is too slow!! If I plug the hard disk with my pc works fine and the bandwidth is very good. Why the samba server of dd-wrt is slow? There is a problem with the hard disk? Thanks for the help!<div><a href="http://www.myopenrouter.com/forum/thread/35177/Linksys-E3000-file-transfer-too-slow.-18050-usb-ftp-samba-dlna/">[Read more]</div> DD-WRT Tue, 24 Jan 2012 20:58:50 GMT FlowerPower http://www.myopenrouter.com/forum/thread/35177/Linksys-E3000-file-transfer-too-slow.-18050-usb-ftp-samba-dlna/#discussion?src=forumtopic_rss http://www.myopenrouter.com/forum/thread/35177/Linksys-E3000-file-transfer-too-slow.-18050-usb-ftp-samba-dlna/?src=forumtopic_rss http://www.myopenrouter.com/forum/thread/35169/Problems-with-build-r17865-E3000-E4200-usb-ftp-samba3-vpn-newd.bin-on-e4200/?src=forumtopic_rss Hi I have had this build running the past few days, i tried upgrading to build r18050/usb-ftp-samba3-vpn-nv60k-broadcom.bin 2 times but it did just say "upgrade failed". I then did a 30-30-30 but i can't access the router again, it has ip 192.168.1.1 and my computer always get 192.168.1.100, a could ping the router but not connect to ssh or telnet. The cisco light are blinking and the lan-port is blinking (have tried all the lan ports and tried 30-30-30 3-4 times now. Is there anybody that could help me?<div><a href="http://www.myopenrouter.com/forum/thread/35169/Problems-with-build-r17865-E3000-E4200-usb-ftp-samba3-vpn-newd.bin-on-e4200/">[Read more]</div> DD-WRT Tue, 24 Jan 2012 19:26:36 GMT teddy83 http://www.myopenrouter.com/forum/thread/35169/Problems-with-build-r17865-E3000-E4200-usb-ftp-samba3-vpn-newd.bin-on-e4200/#discussion?src=forumtopic_rss http://www.myopenrouter.com/forum/thread/35169/Problems-with-build-r17865-E3000-E4200-usb-ftp-samba3-vpn-newd.bin-on-e4200/?src=forumtopic_rss http://www.myopenrouter.com/forum/thread/34983/How-to-configure-two-gateways-on-KONG-mod/?src=forumtopic_rss Hello, I have a asus RT N-16 &amp; installed kong build 18050 successfully. Running good so far but ssh is disabled. Well i am interested in installing several applications like asterisk &amp; transmission. But i have two internet connection &amp; i want to run asterisk server on ISP1 gateway while transmission on the ISP2 gateway. I have configured asus's wan port to connect with ISP1 while I have running ISP2 on 2nd router which is a TPlink running gargoyle. I have setup a VLAN in asus's one port with the ip range of tplink. Now how should i proceed to force my server applications to run on desired WAN gateways. Regards<div><a href="http://www.myopenrouter.com/forum/thread/34983/How-to-configure-two-gateways-on-KONG-mod/">[Read more]</div> DD-WRT Tue, 17 Jan 2012 01:39:25 GMT hellbound1988 http://www.myopenrouter.com/forum/thread/34983/How-to-configure-two-gateways-on-KONG-mod/#discussion?src=forumtopic_rss http://www.myopenrouter.com/forum/thread/34983/How-to-configure-two-gateways-on-KONG-mod/?src=forumtopic_rss http://www.myopenrouter.com/forum/thread/34950/WMMS-disable-slow-connections/?src=forumtopic_rss I have a WNR3500L and I have enabled 40mhz upper when I disable WMMS the N clients only connect at 54Mbps if I enable WMMS the N clients connect at 300Mbps. Does anyone know why?<div><a href="http://www.myopenrouter.com/forum/thread/34950/WMMS-disable-slow-connections/">[Read more]</div> DD-WRT Sun, 15 Jan 2012 23:01:04 GMT Rich http://www.myopenrouter.com/forum/thread/34950/WMMS-disable-slow-connections/#discussion?src=forumtopic_rss http://www.myopenrouter.com/forum/thread/34950/WMMS-disable-slow-connections/?src=forumtopic_rss http://www.myopenrouter.com/forum/thread/34837/Simple-Guest-Access-Setup-DD-WRT-Kong-Mod-18010M/?src=forumtopic_rss I decided to set up secure guest access on my WNR3500L router to allow visitors to access the internet with their wifi devices.. I have next to no command line knowledge, so everything had to be done using the internet browser based graphical user interface (GUI). This thread covers what I did to set up secure guest access the WNR3500L with DD-WRT. First, I flashed (installed) the DD-WRT firmware onto my router and set everything up so that my network (both wireless and wired) was working with good wireless security settings. Next was to activate a virtual interface on the router: Log in to the router GUI and go to Wireless&gt;Basic Settings At Virtual Interfaces, click on [Add]. This will open up a section with more options. In the Virtual Interfaces section, enter a Wireless Network Name (e,g., MyGuest). Wireless SSID Broadcast = Enable (so your gest can see your network on their device). AP Isolation = Disable (because I have no idea what it is). Network Configeration = Bridged (because I think I am going to need it later for security). Click on the [Applied Settings] button and wait 1 minute. Now you need a bit of security so...<div><a href="http://www.myopenrouter.com/forum/thread/34837/Simple-Guest-Access-Setup-DD-WRT-Kong-Mod-18010M/">[Read more]</div> DD-WRT Thu, 12 Jan 2012 05:30:51 GMT rbscairns http://www.myopenrouter.com/forum/thread/34837/Simple-Guest-Access-Setup-DD-WRT-Kong-Mod-18010M/#discussion?src=forumtopic_rss http://www.myopenrouter.com/forum/thread/34837/Simple-Guest-Access-Setup-DD-WRT-Kong-Mod-18010M/?src=forumtopic_rss http://www.myopenrouter.com/forum/thread/34824/Request-for-ushare-binary-build/?src=forumtopic_rss Kong, Will it possible for you to build ushare binary which is compatible with DD-WRT platform and Broadcom hardware. Currently I am using EVO's dd-wrt.v24-17990_NEWD-2_K2.6_big-nv64k.bin build I am cannot use your build since I am using Netgear's WNDR3400 Thanks, Sachin.<div><a href="http://www.myopenrouter.com/forum/thread/34824/Request-for-ushare-binary-build/">[Read more]</div> DD-WRT Wed, 11 Jan 2012 21:46:41 GMT ascii79 http://www.myopenrouter.com/forum/thread/34824/Request-for-ushare-binary-build/#discussion?src=forumtopic_rss http://www.myopenrouter.com/forum/thread/34824/Request-for-ushare-binary-build/?src=forumtopic_rss http://www.myopenrouter.com/forum/thread/34741/Kong-Mod-on-E3000/?src=forumtopic_rss Hello, I have a Linksys/Cisco E3000 v1 with DD-WRT BS 15962 running on it. I experience lot a wireless issue (low speed, unstable connection on 2.4 Ghz). I tried few build from DD-WRT without success, I would like to use the build : 18050 with driver 5.100.138.9 to stabilize my wireless connection. Could you tell me if I can use directly from original firmware (for example) this release : http://www.desipro.de/ddwrt/r18050/usb-ftp-samba3-dlna-nv60k-broadcom.bin Or like DD-WRT, I need a mini image before upgrading to big image? I did not find any mini image "Kong mod" for e3000. Do I need to upgrade to dd-wrt and then upgrade it with kong mod image? Thanks<div><a href="http://www.myopenrouter.com/forum/thread/34741/Kong-Mod-on-E3000/">[Read more]</div> DD-WRT Mon, 09 Jan 2012 11:00:29 GMT meta http://www.myopenrouter.com/forum/thread/34741/Kong-Mod-on-E3000/#discussion?src=forumtopic_rss http://www.myopenrouter.com/forum/thread/34741/Kong-Mod-on-E3000/?src=forumtopic_rss http://www.myopenrouter.com/forum/thread/34732/SSH-Login-Help-SOLVED/?src=forumtopic_rss I hope this is a simple one to solve. I have a vanila installation of DD-WRT Kong Mod 18010M with only the GUI Username changed to [Myname], GUI Password changed to [Mypassword] and the router's Local IP Address set to 10.88.0.1. I have enabled SSH with password login. I then use putty.exe (on Win XP) to SSH access the router on 10.88.0.1. I am then asked for a login name and password. What login name and password do I use to access my router via SSH?<div><a href="http://www.myopenrouter.com/forum/thread/34732/SSH-Login-Help-SOLVED/">[Read more]</div> DD-WRT Mon, 09 Jan 2012 05:41:05 GMT rbscairns http://www.myopenrouter.com/forum/thread/34732/SSH-Login-Help-SOLVED/#discussion?src=forumtopic_rss http://www.myopenrouter.com/forum/thread/34732/SSH-Login-Help-SOLVED/?src=forumtopic_rss http://www.myopenrouter.com/forum/thread/34681/Privoxy-in-Kong-Mod/?src=forumtopic_rss Hello! Now, I am using DD- WRT Kong Mod with my WNR3500L since a few days. I switched from Tomato, which is a vera good firmware, too. But I wanted to have some more features in the GUI and a better integration of SAMBA. I saw the Proxy-section in the GUI and read about Privoxy. It really is an interesting theme to be able to do some more specified content filtering. I gave it a try but it did not really work for me. First, I want to know what settings I have to do: There is an example window on the web: http://tips.desipro.de/__oneclick_uploads/2010/10/proxy.png Is the list complete or do I have to add some more information for a standard setup. The configuartion example in the picture means I have to enter proxy server settings for all web browsers. Or I have to enable transparent mode to filter any traffic. Is this correct? The next question: Is there any GUI for Privoxy to do some settings (I am afriad, it is not)? Perhaps, someone knows a good tutorial for Privoxy on a DD-WRT-Device. Thanks!<div><a href="http://www.myopenrouter.com/forum/thread/34681/Privoxy-in-Kong-Mod/">[Read more]</div> DD-WRT Sat, 07 Jan 2012 11:35:43 GMT efkawe http://www.myopenrouter.com/forum/thread/34681/Privoxy-in-Kong-Mod/#discussion?src=forumtopic_rss http://www.myopenrouter.com/forum/thread/34681/Privoxy-in-Kong-Mod/?src=forumtopic_rss http://www.myopenrouter.com/forum/thread/34646/DD-WRT-compilation-for-WNR-3500L/?src=forumtopic_rss Hi all, http://www.dd-wrt.com/dd-wrtv2/downloads/others/sourcecode/v23/DD-WRT.v23-final.tar.bz2 I download DD-WRT source code from above link. Is there any tool chain is required for this or its already in the code. Is ther any guide is there for compile the source code. Thanks in advance.<div><a href="http://www.myopenrouter.com/forum/thread/34646/DD-WRT-compilation-for-WNR-3500L/">[Read more]</div> DD-WRT Fri, 06 Jan 2012 06:32:06 GMT harish http://www.myopenrouter.com/forum/thread/34646/DD-WRT-compilation-for-WNR-3500L/#discussion?src=forumtopic_rss http://www.myopenrouter.com/forum/thread/34646/DD-WRT-compilation-for-WNR-3500L/?src=forumtopic_rss http://www.myopenrouter.com/forum/thread/34637/Second-USB-HDD-with-DD-WRT-Kong-Mod-18010M/?src=forumtopic_rss I have a Netgear WNR3500L router with DD-WRT Kong Mod USB/FTP/SAMBA3/OpenVPN/Proxy Build 18010M. I have been able to attach my USB HDD (ext3) to the router (via a powered USB hub) and have access to it. Here is what the GUI Services&gt;USB shows. And this HDD is avaiable on my network. I then turn my router off (using the power button on the rear) and connect a second external USB 80GB ext3 format HDD to the powered USB hub. The router is turned back on (using the power button). I close and then reopen the GUI and find Services&gt;USB displaying: And neither HDD is availalable on my network. Is there a way to mount both HDD's onto my router? I have next to no command line knowledge.<div><a href="http://www.myopenrouter.com/forum/thread/34637/Second-USB-HDD-with-DD-WRT-Kong-Mod-18010M/">[Read more]</div> DD-WRT Fri, 06 Jan 2012 00:05:47 GMT rbscairns http://www.myopenrouter.com/forum/thread/34637/Second-USB-HDD-with-DD-WRT-Kong-Mod-18010M/#discussion?src=forumtopic_rss http://www.myopenrouter.com/forum/thread/34637/Second-USB-HDD-with-DD-WRT-Kong-Mod-18010M/?src=forumtopic_rss http://www.myopenrouter.com/forum/thread/34620/Kong-18050/?src=forumtopic_rss What's new kong?<div><a href="http://www.myopenrouter.com/forum/thread/34620/Kong-18050/">[Read more]</div> DD-WRT Thu, 05 Jan 2012 06:34:26 GMT Dark_Shadow http://www.myopenrouter.com/forum/thread/34620/Kong-18050/?page=2#discussion?src=forumtopic_rss http://www.myopenrouter.com/forum/thread/34620/Kong-18050/?src=forumtopic_rss