http://www.myopenrouter.com?src=forumtopic_rss MyOpenRouter - OpenWRT Forum Tue, 23 Dec 2008 18:08:08 GMT admin@myopenrouter.com MyOpenRouter 60 http://www.myopenrouter.com/brand/router/community.gif http://www.myopenrouter.com?src=forumtopic_rss http://www.myopenrouter.com/forum/thread/10735/OpenWRT-Bleeding-Age-crash-issue/?src=forumtopic_rss Hi , I have flashed my NetgearWGR614L with OpenWRT"Bleeding Age" firmware .... It was working OK ... I changed some configuration files (/etc/config/wireless, /etc/config/network & /etc/config/firewall) and rebooted the board ... it was OK ... Idid this sequence several times but after few times my board suddenly crashed while rebooting and now I am not able to boot it again .... I have seen several posts regarding this issue on this site but I am not able to find out the main cause behind this .. As far as this firmware is concerned ... I have tested it several times and it was working OK ... Could anybody plz help me in this regard, OpenWRT Thu, 04 Dec 2008 07:15:12 GMT achilles http://www.myopenrouter.com/forum/thread/10735/OpenWRT-Bleeding-Age-crash-issue/#discussion?src=forumtopic_rss http://www.myopenrouter.com/forum/thread/10590/Booting-OpenWRT-From-the-correct-address/?src=forumtopic_rss After two days of pain I have finally managed to get OpenWRT booting off the flash! What follows is a quick patch (it's not perfect, but it works for me). --- arch/mips/kernel/head.S.orig 2008-10-30 16:33:27.000000000 +0000 +++ arch/mips/kernel/head.S 2008-10-30 16:59:47.000000000 +0000 @@ -107,6 +107,16 @@ __FINIT /* + * Dummy kernel entry for WGR614v8. This should be located + * at 0x80001400 (may be an idea to check System.map). This + * is required as the CFE (1.5 - Fri Jun 6 15:53:24 CST 2008) + * on this board has been hard wired jump to this address! + */ + EXPORT(dummy_kernel_entry) + j kernel_entry + nop + + /* * EJTAG debug exception handler. */ NESTED(ejtag_debug_handler, PT_SIZE, sp) For the interested reader, here is some background on the above. The problem I have been suffering with is that I am able to create .chk files and upload them. However the kernel would not boot from the flash; however I could boot from the network and explain why the TRX file generated by OpenWRT is not enough . So whats really the problem! Well after a little digging around in the CFE sources (from tomato I think, and for a different... OpenWRT Thu, 30 Oct 2008 17:30:57 GMT bzing2 http://www.myopenrouter.com/forum/thread/10590/Booting-OpenWRT-From-the-correct-address/#discussion?src=forumtopic_rss http://www.myopenrouter.com/forum/thread/10520/Current-status/?src=forumtopic_rss Hi I was just wondering is anyone working on this? And what is the current status? Thank you, Per OpenWRT Thu, 25 Sep 2008 12:01:36 GMT ousdal http://www.myopenrouter.com/forum/thread/10520/Current-status/#discussion?src=forumtopic_rss