You are right. This bug is exists in this firmware. In one of the blog it is already mentioned that there are some bugs. For more information please read the blog "http://www.myopenrouter.com/blog/entry/10289/Tomato-Latest-Firmware-Review/". However I am sure that development team is working on those issues. I hope they will soon release the bug free code.
Categories: WGR614L Open Source Router
Hi
I have tested the latest Tomato firmware for wgr614l. In 'Status Overview' page, the disable button is not working. I want to turn off the wireless radio. But its not happened.
I am using wgr614l(with Tomato firmware) as Access Point. What should be the configuration to use it in wireless mode WDS or Wireless Client?
1. Please select the wireless mode as WDS.
2. Specify the MAC address of the AP with wihich you want to associate wgr614l
3. save the setting.
You will need to follow the same steps for the second AP also.
When selecting WDS in the first router and second, cannot connect to wireless network. With first router set to AP and WDS second set to WDS laptop will not roam to second AP. Tried all of the configurations but the second unit seems to not allow connections. I also have access control set up to only allow specific MAC's to access Internet. The second unit shows up in the Device List but not with IP 192.168.1.2 which was assigned. Where am I going wrong? Thanks is advance.


RSS
