BrandonC - Browse Comments

60 Comments Found    1 2 Next »

Reply to Don't try this... ;-) on July 27, 2008

Thanks for the heads up. Wonder what happened. Did you figure out a way to un brick?

Reply to Request to all MyopenRouter.com members... on July 26, 2008

Som, First of all this is just my opinion. #1 - Netgear needs to stop using the same names for different routers. There is a ton of confusion between the various V"x" models. If you...

Reply to WGR614L Firmware Choices Compared on July 15, 2008

There is now a newer DD-WRT chk file available. Anyone tried it?

Reply to WGR614L really a WG614v9? on July 14, 2008

As a side note. Some of the folks in the DD-WRT forums seem to be working on a V9 capable DD-WRT firmware. It looks like they may have something soon.

Reply to Installed ddwrt .chk firmware on wgr 614v8 on July 14, 2008

You probably have to use tftp to do this. I don't know if the DD-WRT firmware is looking for a .bin file or a .trx but it does not like a .chk file. There is...

Reply to how to get same wireless strength in the basement on July 14, 2008

I just like DD-WRT, of course YMMV. :) I run my wireless at 70 and have no problems reaching the second story far bedroom. The idea was to put netstumbler on your computer in the...

Reply to how to get same wireless strength in the basement on July 13, 2008

This is a site dedicated to the Netgear router. But if I were you I would put on the latest DD-WRT firmware on your LinkSys and adjust the power and Sensitivity Range (ACK Timing) to...

Reply to Can't log-in after DD-WRT firmware install on July 12, 2008

try to login using name: root and password: admin

Reply to Recover Your WGR614L Using a Serial Console & Windows on July 11, 2008

Drone said: What are all those other pins for? Is there a second UART available? What about the eight GPIO lines available from the Broadcom SOC? Can we get to those via the eight LEDs...

Reply to Test Light On with Tomato on July 4, 2008

hardpack, Can you even ping it at all?

Reply to I love this concept. Here's why I won't be buying one. on July 2, 2008

Maybe Netgear is testing this product to see how it is received before thinking about doing an Open Router that supports N. Hard to say.

Reply to DD-WRT Firmware on WGR614 v6 on July 1, 2008

Sorry no, V8 only

Reply to WGR614L 'standard' dd-wrt? on June 30, 2008

For some reason he link is bad. Can you fix?

Reply to DD-WRT WGR614L on June 30, 2008

It looks like your link to the svn download is broken. You can either re-edit your post or post it again. I would love to check out the source.

Reply to WGR614L vs KWGR614 vs WGR614? on June 30, 2008

I don't know of any Open source firmware for the V5. Wish there was. I think you are stuck with the Netgear provided stuff. :(

Reply to email notification of network events on June 30, 2008

That would actually pretty handy. Especially to make sure no one is hacking into your WAN. Is there other DD-WRT firmware that does this?

Reply to Recover Your WGR614L Using a Serial Console & Windows on June 30, 2008

Good catch. Fixed. Thanks

Reply to DD-WRT on WGR614v8 on June 29, 2008

twindragon6 said: Is it ready yet? Yup, right here DD-WRT Firmware for NETGEAR WGR614L v24-9281

Reply to Recover Your WGR614L Using a Serial Console & Windows on June 29, 2008

Gotcha now, thanks for the heads up. I added that to the article. Here is the Pin Layout Pin 2 is the RXD to Receive Data Pin 5 the TXD to transmit Data and Pin...

Reply to DD-WRT Firmware for WGR 614L has been Released on June 29, 2008

twindragon6 said: Will this work on the WGR614 V8 or could someone make a build for it with the standard DD-WRT V24 firmware? Not sure what you are asking. The V8 is what the download...

Reply to Rebranding/Repackaging/Reselling a WGR614L on June 29, 2008

I think if you developed it and sold it as exactly what it is, a WGR614L, with special software that would be fine. Kinda of how DVRUpgrade works. I would not try and sell it...

Reply to Recover Your WGR614L Using a Serial Console & Windows on June 29, 2008

Whatever cable you buy should have something with it that shows the TX, RX, GND wire colors. If not you will have to contact that company and get the information.

Reply to WGR614L 'standard' dd-wrt? on June 24, 2008

Not that I have seen. Only the version available here.

Reply to Poll: Will You Be Upgrading to DD-WRT On Your WGR614L? on June 16, 2008

DD-WRT has been available for a week or so now. How many folks have tried it? I put it on and it seems to work great.

Reply to Reset to DD-WRT to defaults on June 15, 2008

Ya, I think they recommend 20 secs for the WGR614L

Reply to Serial number to version list. on June 13, 2008

Same serial version as my V8

Reply to Reset to DD-WRT to defaults on June 13, 2008

If I underestimate your abilities please forgive me. First you need to see if you can PING the router. See his article on how to do so. http://www.myopenrouter.com/article/10277/Ping---Explained/ Will it Ping? If not then while...

Reply to Can't upgrade firmware, is this really a WGR614L? on June 11, 2008

I would email Som, in the post you mentioned. Sounds like he will take care of things.

Reply to Debug console on June 9, 2008

SouvikGhosh said: It is evident from the dump that every time your kernel is trying to boot. Actually you need to press ctrl+c while rebooting the router to get the CFE prompt. Please try that.....

Reply to Debug console on June 7, 2008

Nachi, On one of my routers that won't boot I see an ifniite loop in the serial console. It just starts over and over again. So I never get to the CFE prompt. Any ideas...

1 2 Next »