WN Series Open Source Firmware

WNDR3700v4 bricked router - need help !!!

pendrag's picture
Submitted by pendrag on Sun, 12/14/2014 - 9:37pm

Forums: 

Hi,

netgear 3800b

alisher75's picture
Submitted by alisher75 on Sun, 12/14/2014 - 4:22am

Forums: 

say olease is there alternative firmwear for my netgear?can i install 3800 firmwear on my netgear 3800b?

USB Drive Connection

tschwenke's picture
Submitted by tschwenke on Thu, 12/04/2014 - 10:54am

Forums: 

Short story.. in-laws have 3500L and went to a larger USB drive, the stock firmware doesn't see it so I decided to upgrade to DD-WRT.  

I flashed : DDWRT Kong Mod USB/FTP/SAMBA3/...  Build 22000+

When I connect the drive, it says:  ... mounted to /tmp/mnt/disk0-part1

Settings:

Problems with latest Shibby Tomato

SoftTech's picture
Submitted by SoftTech on Tue, 11/04/2014 - 11:32am

Forums: 

IPv6 crashes the router when I try to enable it.  I have to 30/30/30 reset and restore my configuration.

I am on Time Warner Cable if that matters.

How can I fix it?  I've had this problem with every Shibby Tomato build I've tried

Netgear WNR3500L v2

Tomato Firmware 1.28.0000 MIPSR2-123 K26 USB AIO

Most Desired features in WNR3500Lv2

Subhra's picture
Submitted by Subhra on Tue, 10/28/2014 - 4:15am

Forums: 

Hi all users of WNR3500Lv2,

Hope you have played with various firmwares for WNR3500Lv2 available in this site (Link).

What are your thoughts on the feature list of these firmwares?
What are the features you think important to you but still missing in these firmwares?

Some newbie trouble.

koosjr's picture
Submitted by koosjr on Sat, 10/11/2014 - 1:57pm

Forums: 

I just got a new Netgear WNR3500Lv2 and flashed it with Shibby's version of Tomato.

 

The flash itself was very easy and the router started up with plenty of more functions than the standard firmware which I am excited to try.

 

However, there are a couple of thigns that does not work and I don't know why.

 

1. Unlike the standard firmware, the router does not work "out of the box" when connected via the WAN port to my ADSL modem. I tried most of the options I could find on this site but no go.

 

Please analyse log - i think my router has been highjacked

mmaryan's picture
Submitted by mmaryan on Mon, 10/06/2014 - 4:45am

Forums: 

I have 3500l v2 with tomato shibby. Llast day i saw that my internet is unstable. I checked logline, and saw this: could someone kindly analyze it?

Wnr3500Lv2 Tomato Shibby - my script has different behavior in scheduler

nbrunaud's picture
Submitted by nbrunaud on Sun, 10/05/2014 - 12:47pm

Forums: 

I'm beginner with shell scripting, so maybe I'm missing something very basic... 

My script does work perfectly  in "tools>system commands",  but the "find" command fails in "administration >scheduler"... 

Is there any reason why the behavior is different? Environment?  Why the" find" only, and not the rest? 

 

The code is directly pasted in the scheduler page... 

Here is the full script 

 

if [ -e $runningfile ]  ; then

     echo already running

      # echo already running > $logfile

 else

Error Erasing MTD Block during firmware update. 3500lv2

Kingsama's picture
Submitted by Kingsama on Sat, 09/27/2014 - 11:21pm

Forums: 

I bought a router second hand that was running shibby's version of Tomato.  I wanted to wipe the router and update to the AIO firmware.  When I attempted to update the firmware it began fine, but then it suddenly stated "error erasing MTD block" and attempted to rebbot.  When it attempted to reboot it wouldn't completely boot up.  I have tried to reset it using a hard reset and a 30-30-30 but still just the power lite blinking green.  Any help would be great!

WNR3500Lv2 bricked!

Stephen707's picture
Submitted by Stephen707 on Tue, 09/09/2014 - 5:31am

Forums: 

After running happily tomato-Netgear-3500Lv2-K26USB-1.28.RT-N5x--120-AIO.chk,

I tried to install tomato-K26USB-1.28.RT-MIPSR2-120-AIO.trx (please do not ask why)

and bricked my WNR3500Lv2... steady amber light after a brief flash of blue (wireless LED) after power-on. 

Ping shows 1-3 successful replies during boot (presumably during brief flash of blue), pings before and after are lost.

Any idea what went wrong? 

Thanks,

Stephen (waiting for delivery of USB-serial cable)

:(

Pages