Bricked on DD-WRT V24 Special for Broadcom Chips (pro)

3 posts / 0 new
Last post
TimP
TimP's picture
Bricked on DD-WRT V24 Special for Broadcom Chips (pro)

Meh,

 So I bought it this morning, downloaded the bin and uploaded it, I now have a full range of yellow (Amber?) on my lights and so I wait for the USB-TTL wire from Scotland. I had installed the K26 version Nukie had put up earlier and that had worked fine. I am wondering what I could have done different or if I bought the wrong version. If anyone has tried this before successfully, please let me know.

Kong
Kong's picture
Before and after an upgrade

Before and after an upgrade you need to do a 30/30/30 reset, as described on dd-wrt page. Besides that after flashing you need to wait at least 5 minutes before you login and change any settings.

TimP
TimP's picture
I should update this. The 30

I should update this. The 30/30/30 failed to me and so I opened my router, there were NO headers. I followed this guide instead of this guide. Everything worked according to the guide and I had no problems aside from the very tedious job of soldering with no headers.