I was so exicited to flash that I forgot to make a backup of the Netgear stock firmware, I need to send it in to get replaced and wanted to put the stock firmware back in. Not sure on how to do this, so any help would be greatly appreciated!
Rehabilitation, underground utilities, sewer installation and repair
American Sewer and Utilities has consistently demonstrated excellence in the design and construction of a myriad of projects encompassing underground utilities, site development, leach fields, pump stations, landscaping, sanitary sewer, and municipal & residential rehabilitation. Our distinguished team comprises seasoned professionals and skilled artisans, dedicated to providing superior construction consultation and management servicesRecent comments
- After the initial Kong Mod 11 months 3 days ago
- Working the EXACT same 11 months 4 days ago
- While the "5 Easy Steps" 11 months 2 weeks ago
- R8000P would be grate to see. 11 months 2 weeks ago
- Have a R8000 but ordered a 11 months 2 weeks ago
http://www.downloads.netgear.com/files/GDC/R7000/R7000_V1.0.3.24_1.1.20.zip
Please mention which firmware you are using currently in your R7000.
it shows me that I am using firmware DD-WRT v24-sp2 (02/13/14) when i put the netgear firmware in after reboot it shows me that I am using the dd-wrt firmware and only gives me the dd-wrt interface!
Are you sure you uploaded the correct chk? DD-WRT might accept a fw image and tell you that upload was complete, but if the image was not for this model it will stop flashing and just reboot.
I thought that I did, do you know which one I should use? I got it from the netgear site. It should have been the right one