R9000 get(Not mounted after enabled jffs2 support.

4 posts / 0 new
Last post
Goldberg
Goldberg's picture
R9000 get(Not mounted after enabled jffs2 support.

Hi,

I am using the newest dd wrt fireware (32170M). I just cannot get the jffs mounted. In the administration page, the jffs2 support shows not mounted. I have tried clean the internal flash storage for many times.

 

here is my /proc/mtd 

mtd0: 001e0000 00020000 "u-boot"
mtd1: 00120000 00020000 "u-boot-env"
mtd2: 00140000 00020000 "ART"
mtd3: 00140000 00020000 "ART.bak"
mtd4: 00440000 00020000 "kernel"
mtd5: 02800000 00020000 "rootfs"
mtd6: 011c0000 00020000 "ddwrt"
mtd7: 02c40000 00020000 "linux"
mtd8: 04480000 00020000 "netgear"
mtd9: 12c00000 00020000 "plex"
mtd10: 05780000 00020000 "reserve"
mtd11: 00080000 00020000 "crashdump"
mtd12: 00380000 00020000 "language"
mtd13: 00120000 00020000 "nvram"
mtd14: 00120000 00020000 "pot"
 
and my mount:
/dev/root on / type squashfs (ro,relatime)
proc on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
ramfs on /tmp type ramfs (rw,relatime)
none on /dev type tmpfs (rw,relatime,size=512k)
devpts on /dev/pts type devpts (rw,relatime,mode=600,ptmxmode=000)
 
Could anyone help me?
 
Regards
 
fabio5479
fabio5479's picture
Did you manage to solve it?

Did you manage to solve it?

I have same problem with DD-WRT v3.0-r34015M kongal (12/11/17)

 

Any help would appreciated.

dannyjones
dannyjones's picture
Yes fabio5479 ..

Yes fabio5479 ..

I faced the same problem..But one of my friend slove it..     

                                                                                                             .                Management Writing Solutions

 

dannyjones
dannyjones's picture
Yes fabio5479 ..

Yes fabio5479 ..

I faced the same problem..But one of my friend slove it..     

                                                                                                             .                Management Writing Solutions