R8000 Bootlop After Flashing Tomato

2 posts / 0 new
Last post
iDon
iDon's picture
R8000 Bootlop After Flashing Tomato

Hello all. So i decided to put tomato on my R8000 i just got and everything was going fine until i had to flash the last file, then after that its on a bootlop. i have tried going into recovery mode, but dont quite know if im doing it right, i have also tried to tftp it through windows and i get connect request failed, also tried tftp 2 and nothing. just bootloop after bootloop. Really want to use this router, anybody have anny succesful suggestion or ideas to unbrick this? Thanks

ddennis002
ddennis002's picture
if your sure tftp is not

if your sure tftp is not working then you will need to follow this guide to get the router flashed. https://www.ianthurston.com/tech/bricked-netgear-r8000-recovery/