DD-WRT for R9000

DD-WRT Kong Mod for NETGEAR R9000 (2018-11-24 INITIAL)

http://www.desipro.de/ddwrt/K4-AC-ALPINE/

 

R9000 build:

Flash R9000-factory-to-ddwrt.img build from Netgear firmware.
Once dd-wrt is running you have to use ddwrt-netgear-R9000.bin
to flash future updates.

Currently known issue:

-2G and 5G leds are not operational since they cannot be controlled through gpio.
 Current opensource wireless driver has no support to control these leds.

-60G interface info is currently not correctly display in status pages and
 due to missing 60G client, 60G operation is untested

If you want to revert to netgear firmware flash: ddwrt-to-netgear-fw-R9000.bin

DD-WRT Kong Mod for NETGEAR R9000 (2018-11-24 .BIN)

 

http://www.desipro.de/ddwrt/K4-AC-ALPINE/

Readme:

R9000 build: Flash R9000-factory-to-ddwrt.img build from Netgear firmware. Once dd-wrt is running you have to use ddwrt-netgear-R9000.bin to flash future updates. Currently known issue: -2G and 5G leds are not operational since they cannot be controlled through gpio. Current opensource wireless driver has no support to control these leds. -60G interface info is currently not correctly display in status pages and due to missing 60G client, 60G operation is untested If you want to revert to netgear firmware flash: ddwrt-to-netgear-fw-R9000.bin

DD-WRT Kong Mod for NETGEAR R9000 (2018-10-08 INITIAL)

http://www.desipro.de/ddwrt/K4-AC-ALPINE/

 

R9000 build:

Flash R9000-factory-to-ddwrt.img build from Netgear firmware.
Once dd-wrt is running you have to use ddwrt-netgear-R9000.bin
to flash future updates.

Currently known issue:

-2G and 5G leds are not operational since they cannot be controlled through gpio.
 Current opensource wireless driver has no support to control these leds.

-60G interface info is currently not correctly display in status pages and
 due to missing 60G client, 60G operation is untested

If you want to revert to netgear firmware flash: ddwrt-to-netgear-fw-R9000.bin
 
 

 

DD-WRT Kong Mod for NETGEAR R9000 (2018-10-08 .BIN)

http://www.desipro.de/ddwrt/K4-AC-ALPINE/

 

R9000 build:

Flash R9000-factory-to-ddwrt.img build from Netgear firmware.
Once dd-wrt is running you have to use ddwrt-netgear-R9000.bin
to flash future updates.

Currently known issue:

-2G and 5G leds are not operational since they cannot be controlled through gpio.
 Current opensource wireless driver has no support to control these leds.

-60G interface info is currently not correctly display in status pages and
 due to missing 60G client, 60G operation is untested

If you want to revert to netgear firmware flash: ddwrt-to-netgear-fw-R9000.bin
 
 

DD-WRT Kong Mod for NETGEAR R9000 (2018-5-26 .BIN)

http://www.desipro.de/ddwrt/K4-AC-ALPINE/

 

R9000 build:

Flash R9000-factory-to-ddwrt.img build from Netgear firmware.
Once dd-wrt is running you have to use ddwrt-netgear-R9000.bin
to flash future updates.

Currently known issue:

-2G and 5G leds are not operational since they cannot be controlled through gpio.
 Current opensource wireless driver has no support to control these leds.

-60G interface info is currently not correctly display in status pages and
 due to missing 60G client, 60G operation is untested

If you want to revert to netgear firmware flash: ddwrt-to-netgear-fw-R9000.bin
 
 

DD-WRT Kong Mod for NETGEAR R9000 (2018-5-26 INITIAL)

http://www.desipro.de/ddwrt/K4-AC-ALPINE/
----------

R9000 build: Flash R9000-factory-to-ddwrt.img build from Netgear firmware. Once dd-wrt is running you have to use ddwrt-netgear-R9000.bin to flash future updates. Currently known issue: -2G and 5G leds are not operational since they cannot be controlled through gpio. Current opensource wireless driver has no support to control these leds. -60G interface info is currently not correctly display in status pages and due to missing 60G client, 60G operation is untested If you want to revert to netgear firmware flash: ddwrt-to-netgear-fw-R9000.bin

DD-WRT Kong Mod for NETGEAR R9000 (2018-5-14 .BIN)

This is the .BIN file used to upgrade from an existing Kong DD-WRT installation on the R9000.
Flashing from stock firmware requires the .IMG initial flash file.

http://www.desipro.de/ddwrt/K4-AC-ALPINE/

 

R9000 build:

Flash R9000-factory-to-ddwrt.img build from Netgear firmware.
Once dd-wrt is running you have to use ddwrt-netgear-R9000.bin
to flash future updates.

Currently known issue:

-2G and 5G leds are not operational since they cannot be controlled through gpio.
 Current opensource wireless driver has no support to control these leds.

-60G interface info is currently not correctly display in status pages and
 due to missing 60G client, 60G operation is untested

If you want to revert to netgear firmware flash: ddwrt-to-netgear-fw-R9000.bin

http://www.desipro.de/ddwrt/K4-AC-ALPINE/

DD-WRT Kong Mod for NETGEAR R9000 (2018-5-14 INITIAL)

This is the .IMG file used to upgrade from stock NETGEAR firmware on the R9000 to DD-WRT.
Flashing from one Kong build to another requires the .BIN file.

http://www.desipro.de/ddwrt/K4-AC-ALPINE/

 

R9000 build:

Flash R9000-factory-to-ddwrt.img build from Netgear firmware.
Once dd-wrt is running you have to use ddwrt-netgear-R9000.bin
to flash future updates.

Currently known issue:

-2G and 5G leds are not operational since they cannot be controlled through gpio.
 Current opensource wireless driver has no support to control these leds.

-60G interface info is currently not correctly display in status pages and
 due to missing 60G client, 60G operation is untested

If you want to revert to netgear firmware flash: ddwrt-to-netgear-fw-R9000.bin

DD-WRT Kong Mod for NETGEAR R9000 (2018-2-14 INITIAL)

This is the .IMG file used to upgrade from stock NETGEAR firmware on the R9000 to DD-WRT.
Flashing from one Kong build to another requires the .BIN file.

http://www.desipro.de/ddwrt/K4-AC-ALPINE/

R9000 build:

Flash R9000-factory-to-ddwrt.img build from Netgear firmware.
Once dd-wrt is running you have to use ddwrt-netgear-R9000.bin
to flash future updates.

Currently known issue:

-2G and 5G leds are not operational since they cannot be controlled through gpio.
 Current opensource wireless driver has no support to control these leds.

-60G interface info is currently not correctly display in status pages and
 due to missing 60G client, 60G operation is untested

If you want to revert to netgear firmware flash: ddwrt-to-netgear-fw-R9000.bin

DD-WRT Kong Mod for NETGEAR R9000 (2018-2-14 .BIN)

This is the .BIN file used to upgrade from an existing Kong DD-WRT installation on the R9000.
Flashing from stock firmware requires the .IMG initial flash file.

http://www.desipro.de/ddwrt/K4-AC-ALPINE/

R9000 build:

Flash R9000-factory-to-ddwrt.img build from Netgear firmware.
Once dd-wrt is running you have to use ddwrt-netgear-R9000.bin
to flash future updates.

Currently known issue:

-2G and 5G leds are not operational since they cannot be controlled through gpio.
 Current opensource wireless driver has no support to control these leds.

-60G interface info is currently not correctly display in status pages and
 due to missing 60G client, 60G operation is untested

If you want to revert to netgear firmware flash: ddwrt-to-netgear-fw-R9000.bin
 

Pages