DD-WRT for R9000

This is the .BIN file used to upgrade from an existing Kong DD-WRT installation on the R9000.
Flashing from stock firmware requires the .IMG initial flash file.

http://www.desipro.de/ddwrt/K4-AC-ALPINE/

R9000 build:

Flash R9000-factory-to-ddwrt.img build from Netgear firmware.
Once dd-wrt is running you have to use ddwrt-netgear-R9000.bin
to flash future updates.

Currently known issue:

-2G and 5G leds are not operational since they cannot be controlled through gpio.
 Current opensource wireless driver has no support to control these leds.

-60G interface info is currently not correctly display in status pages and
 due to missing 60G client, 60G operation is untested

If you want to revert to netgear firmware flash: ddwrt-to-netgear-fw-R9000.bin

http://www.desipro.de/ddwrt/K4-AC-ALPINE/

This is the .IMG file used to upgrade from stock NETGEAR firmware on the R9000 to DD-WRT.
Flashing from one Kong build to another requires the .BIN file.

http://www.desipro.de/ddwrt/K4-AC-ALPINE/

R9000 build:

Flash R9000-factory-to-ddwrt.img build from Netgear firmware.
Once dd-wrt is running you have to use ddwrt-netgear-R9000.bin
to flash future updates.

Currently known issue:

-2G and 5G leds are not operational since they cannot be controlled through gpio.
 Current opensource wireless driver has no support to control these leds.

-60G interface info is currently not correctly display in status pages and
 due to missing 60G client, 60G operation is untested

If you want to revert to netgear firmware flash: ddwrt-to-netgear-fw-R9000.bin

R9000 build:

Flash R9000-factory-to-ddwrt.img build from Netgear firmware.
Once dd-wrt is running you have to use ddwrt-netgear-R9000.bin
to flash future updates.

Currently known issue:

-2G and 5G leds are not operational since they cannot be controlled through gpio.
 Current opensource wireless driver has no support to control these leds.

-60G interface info is currently not correctly display in status pages and
 due to missing 60G client, 60G operation is untested

If you want to revert to netgear firmware flash: ddwrt-to-netgear-fw-R9000.bin

This is the .BIN file used to upgrade from an existing Kong DD-WRT installation on the R9000. 
Flashing from stock firmware requires the .IMG initial flash file.

R9000 build:

Flash R9000-factory-to-ddwrt.img build from Netgear firmware.
Once dd-wrt is running you have to use ddwrt-netgear-R9000.bin
to flash future updates.

Currently known issue:

-2G and 5G leds are not operational since they cannot be controlled through gpio.
 Current opensource wireless driver has no support to control these leds.

-60G interface info is currently not correctly display in status pages and
 due to missing 60G client, 60G operation is untested

If you want to revert to netgear firmware flash: ddwrt-to-netgear-fw-R9000.bin