Firmware Upgrade Procedure:-
=============================
Always use the following steps to upgrade your firmware.
- Perform reset to factory defaults setting in existing Firmware.
- Perform Firmware Upgrade.
- Perform reset to factory defaults setting in newly upgraded DD-WRT Firmware.
- Use DD-WRT in your router.
IMPORTANT NOTE:-
================
* A few users have reported issues with a previous (26-Sep-2014) DDWRT release for WNDR4500v2 by Tathagata, where the device is not booting properly after firmware flash. Therefore, it is recomended to have a serial console setup before using this release.
26-Nov-2014:-
=============
DDWRT firmware is based on revision 25344.
Features Added:-
-----------------
- Lighttpd
- SIP Proxy
28-Oct-2014:-
=============
Features Added:-
-----------------
- Bittorrent
- NoCatSplash
26-Sep-2014:-
=============
DDWRT firmware is based on revision 24170.
Features Included :-
---------------------
- Wireless Basic
- Wireless Security
- Wireless Guest Network
- Wireless Guest NetWrok Security
- Wireless Bridging (Wireless Client Bridge)
- USB Storage
- USB auto-mount Support (Single and multiple partition)
- File System (VFAT, Ext2, Ext3, NTFS)
- jffs2
- IPKG
- Firmware Upgrade
- Factory Reset
- Backup Settings
- Reset Button
- Wifi ON/OFF Button
- LED
- WAN Configurable in STATIC, DHCP ,PPPoE and PPTP mode
- Secure Shell (SSH, SCP)
- Telnet
- Remote WebGUI Management
- Remote Telnet Management
- Remote SSH Management
- VLANs
- Iptables
- Firewall
- PPTP VPN Server
- OpenVPN Client
- VPN Passthrough
- PPPoE Server
- DDNS
- SNMP
- epi-ttcp
- iperf
- NTP Client
- Scheduled Reboot
- Boot Wait
- Cron
- Syslog
- MAC Address Clone
- WOL
- Port Forrowarding
- Port Range Forrwarding
- Port Triggering
- DMZ
- miniDLNA
- UPnP
- Zabbix Client
- FreeRadius Server
- FTP
- SAMBA3
- Bandwidth Monitoring
Recent comments