Tomato for WN3500L V1/V2

Tomato for WN3500L V1/V2

Tomato Firmware by Shibby for WNR3500Lv1 All-In-One

Tomato Firmware by shibby, All-In-One version for WNR3500L.

Tomato by Shibby for WNR3500Lv2 090-AIO (All In One)

Tomato by shibby dedicated for new WNR3500L v2.

AIO = All In One, this is my biggest build

Features:
- OpenVPN integration and GUI
- Transmission 2.50 integration
- GUI for Transmission
- Custom log file path
- SD-idle tool integration for kernel 2.6
- 3G Modem support
- SNMP integration and GUI
- Extended Sysinfo
- QOS-detailed & ctrate filters
- Realtime bandwidth monitoring of LAN clients
- Static ARP binding
- VLAN administration GUI
- Multiple LAN support integration and GUI
- Configurable QOS class names
- Comprehensive QOS rule examples set by default
- Revised IP/MAC Bandwidth Limiter
- DNScrypt-proxy integration and GUI
- UDPxy integration and GUI
- NFS server integration and GUI
- APCUPSD (UPS Monitor) integration and GUI
- HFS/HFS+ filesystem sypport
- Captive Portal. (Based in NocatSplash)
- PPTP Server with GUI
- MultiSSID with GUI

Changes from 088 to 090:
- added MultiSSID
- added PPTP server
- change blocklist update function to not using transmission-remote nomore
- remove transmission-remote will save lot of space
- remote TR_EXTRAS (transmission-create)
- OpenVPN update to 2.2.2
- BW Limiter: default classes for each LAN (br1/2/3)

Know bugs:
- Wireless led does not off when wireless is turned off
- wrong NVRAM Free value on administration -> configuration page

*.chk firmware you can upgrade directly from OFW.

If you don`t need all those featurer (APC, NFS, BT) you can download smaller build (BT-VPN or VPN): http://tomato.groov.pl/index.php?dir=K26RT-N%2Fbuild5x-090-EN%2FWNR3500Lv2

Discussion:
- EN: http://www.linksysinfo.org/index.php?threads/let-s-talk-about-netgear-35.....
- PL: http://openlinksys.info/forum/viewthread.php?thread_id=13762
http://openlinksys.info/forum/viewthread.php?thread_id=11624

Best Regards!

Tomato by Shibby for WNR3500Lv2 088-AIO (All In One)

Tomato by shibby dedicated for new WNR3500L v2.
Linux kernel 2.6.22.19 and Broadcom Wireless Driver 5.100.138.9

AIO = All In One, this is my biggest build

Features:
- VPN integration and GUI
- Transmission 2.50 integration
- GUI for Transmission
- Custom log file path
- SD-idle tool integration for kernel 2.6
- 3G Modem support
- SNMP integration and GUI
- Extended Sysinfo
- QOS-detailed & ctrate filters
- Realtime bandwidth monitoring of LAN clients
- Static ARP binding
- VLAN administration GUI
- Multiple LAN support integration and GUI
- Configurable QOS class names
- Comprehensive QOS rule examples set by default
- Revised IP/MAC Bandwidth Limiter
- DNScrypt-proxy integration and GUI
- UDPxy integration and GUI
- NFS server integration and GUI
- APCUPSD (UPS Monitor) integration and GUI
- HFS/HFS+ filesystem sypport
- Captive Portal. (Based in NocatSplash)

Changes from 083V to 088:

* 084
- few changes in compilation of transmission (should be more stable)
- added ratio option 0.0
- Add ZTE MF192 3G modem support
- fix MARK module
- Additional options to syslog (local file)
- route modem IP for "Static" WAN

* 085
- ip6tables fixed - "account" and "lan access" error
- fix Toggle Visibility on QoS pages
- fix syslog service when custom path is enabled
- WOL should now works on br1,2,3
- cosmetics changes in status-overview about LAN section
- Transmission update from 2.42 to 2.50

* 087
- fix usb_modeswitch (libusb error). 3G support will works now
- USB Speed improved. Old schema detection enabled.
- miniDLNA update from 1.0.22 to 1.0.24
- little cosmetics changes in Overview page. Able to show/hide each section
- IP Traffic: when/if set to 'disabled', we 'really' mean it
- fix VLAN support for WNR3500Lv2 and remove JFFS support for this router

* 088
- dnscrypt-proxy integration with GUI (basic -> network)
- UDPxy integration with GUI by Teaman (advanced -> firewall)
- qos-graphs fixed
- status-overview fixed (works autorefresh and show buttons)
- increase max of bwlimit entries from 40 to 80
- removed user-define imq settings (advanced -> firewall)
- don`t disable USB 3G box when storage checkbox is not checked
- ups monitor service inprovements
- add UPS feature to AIO

Know bugs:
- Wireless led does not off when wireless is turned off
- wrong NVRAM Free value on administration -> configuration page

*.chk firmware you can upgrade directly from OFW.

If you don`t need all those featurer (APC, NFS, BT) you can download smaller build (BT-VPN or VPN): http://tomato.groov.pl/index.php?dir=K26RT-N%2Fbuild5x-088-EN%2FWNR3500Lv2

Discussion:
- EN: http://www.linksysinfo.org/index.php?threads/let-s-talk-about-netgear-35......
- PL: http://openlinksys.info/forum/viewthread.php?thread_id=13762
http://openlinksys.info/forum/viewthread.php?thread_id=11624

Best Regards!

Tomato by Shibby for WNR3500Lv2 083V-BT-VPN

Tomato by shibby dedicated for new WNR3500L v2.
Linux kernel 2.6.22.19 and Broadcom Wireless Driver 5.100.138.9

Version BT-VPN with build-in Transmission (torrent client), SNMP, 3G modem support, IPTraffic and OpenVPN server/client.

Features:
- VPN integration and GUI
- Transmission 2.42 integration
- GUI for Transmission
- Custom log file path
- SD-idle tool integration for kernel 2.6
- 3G Modem support
- SNMP integration and GUI
- Extended Sysinfo
- QOS-detailed & ctrate filters
- Realtime bandwidth monitoring of LAN clients
- Static ARP binding
- VLAN administration GUI (not working for now)
- Multiple LAN support integration and GUI
- Configurable QOS class names
- Comprehensive QOS rule examples set by default
- Revised IP/MAC Bandwidth Limiter

Fixed bugs:
- USB port works correct
- WAN support PPPoE connection
- WPS button support - 1sec hold switch wireless on/off
- Leds works correct

Know bugs:
- Wireless led does not off when wireless is turned off
- Can`t configure VLANs using GUI

*.chk firmware you can upgrade directly from OFW.

More downloads: http://tomato.groov.pl/index.php?dir=K26RT-N%2Fbuild5x-083V%2FWNR3500Lv2

Discussion:
- EN: http://www.linksysinfo.org/index.php?threads/let-s-talk-about-netgear-35...
- PL: http://openlinksys.info/forum/viewthread.php?thread_id=13762
http://openlinksys.info/forum/viewthread.php?thread_id=11624

Tomato Firmware for NETGEAR WNR3500Lv2 Initial Release + Src

This package contains the tomato source code for Netgear WNR3500Lv2, one built-in firmware and a README.

To compile the source code for Netgear WNR3500Lv2 follow the instructions below .....

* export your toolchain path.
* cd tomato/release/src
* make wnr3500lv2 V1=v52 V2=_no_tcp_vegas

If everythings goes well then you can find the firmware under "tomato/release/src/image" directory. Name of the firmware is "tomato-wnr3500lv2.chk" .

Main Features added:
--------------------
* USB as Network Attached Storage(NAS).
* USB with multiple partitions.
* SAMBA with Share level access.
* Remote login using ssh and telnet.
* Remote copy using scp.
* FTP server.
* Tomato Web UI.
* Firmware upgrade.
* WAN is configurable in static and dynamic mode.
* Wireless (Basic + Security).

Issues:
------
* LED needs to be tested/supported.
* PPPoE needs to be supported.

Toastman Tomato Firmware

file has already been converted to a .bin file so you can upgrade to it from dd-wrt if already on your WNR3500L it only works on the WNR3500L please don't flash this on other router units or it will not work you can also upgrade to this newer version if you already have tomato installed

fixes included are as follows

October 26 2011

Toastman-RT-1.28.7486.4-RT MIPSR2 K2.6 for RT-N16 etc.

Some small cosmetics changes
Fixed wireless mitigation, WLAN AUTO with Noise Reduction setting

NB - There is still a problem with the mitigation selection, which hopefully will be fixed in the future.

Want to donate to support Toastman's development efforts? Click here! (Donations are not affiliated with MyOpenRouter. All proceeds go to Toastman to support development efforts.)

Tomato Firmware without USB Build 52 (Compatible with NETGEAR WNR3500L) (Std.)

Build 52 - 10/15/2010

Changes common for kernel 2.4 and kernel 2.6 based builds:

* Fixed WAN Up script not being executed (was broken in build 51).
* Fixed obtaining DHCP lease from Corbina Beeline and possibly other ISPs (was broken in build 51).
* Fixed DHCP renewal processing to not replace the default gateway and DNS servers for PPTP/L2TP connections.
* Fixed errors in routing for PPTP/L2TP connections.
* Added "Use Default Gateway on Remote Network" option for PPTP/L2TP connection types (turned on by default). Turn it off to use gateway obtained via DHCP for internet routing, and only use PPTP/L2TP gateway for VPN subnet (custom routing may be required in case if VPN network contains multiple subnets).
* Resolve sporadic PPPoE disconnect issues with some ISPs.
* Allow to configure custom TTL values in the Web GUI.
* Make sure PPTP/L2TP is gracefully disconnected after firmware upgrades and after restoring configuration to prevent connection problems after reboot.
* Size optimization of some large applications.
* Software updates: PPTP kernel driver 0.8.5, Busybox 1.17.3.
* Cosmetics.

Kernel 2.6-based builds only (beta23):

* Fixed Mini build for Netgear routers with 4MB flash (WNR2000v2, WNR3500v2), removed RIPv1/v2 routing from Mini build due to Netgear size restrictions, added JFFS to Mini build to make use of some otherwise wasted flash space.
* Fixed flashing all supported Netgear routers back to OEM firmware.
* Media server: removed some rare and obsolete demuxers to reduce size, reduced MiniDLNA memory usage.
* Minor backports from upstream 2.6 kernel.

NOTES:

1. When upgrading Netgear routers from previous build 51, you will get an error message "Error writing fake Netgear CRC". Don't worry about it - just wait for a couple minutes for router to reboot, and the new firmware will be loaded anyway, regardless of this error.
2. A few new options are now automatically added to the default Dnsmasq configuration file, so if you have the same options in the Dnsmasq Custom Configuration box, you need to remove them to avoid errors starting Dnsmasq. The new options are:
* log-async
* all-servers ( * cache-size (

Tomato Firmware with USB Build 52 (Compatible with NETGEAR WNR3500L) (EXT)

Build 52 - 10/15/2010

Changes common for kernel 2.4 and kernel 2.6 based builds:

* Fixed WAN Up script not being executed (was broken in build 51).
* Fixed obtaining DHCP lease from Corbina Beeline and possibly other ISPs (was broken in build 51).
* Fixed DHCP renewal processing to not replace the default gateway and DNS servers for PPTP/L2TP connections.
* Fixed errors in routing for PPTP/L2TP connections.
* Added "Use Default Gateway on Remote Network" option for PPTP/L2TP connection types (turned on by default). Turn it off to use gateway obtained via DHCP for internet routing, and only use PPTP/L2TP gateway for VPN subnet (custom routing may be required in case if VPN network contains multiple subnets).
* Resolve sporadic PPPoE disconnect issues with some ISPs.
* Allow to configure custom TTL values in the Web GUI.
* Make sure PPTP/L2TP is gracefully disconnected after firmware upgrades and after restoring configuration to prevent connection problems after reboot.
* Size optimization of some large applications.
* Software updates: PPTP kernel driver 0.8.5, Busybox 1.17.3.
* Cosmetics.

Kernel 2.6-based builds only (beta23):

* Fixed Mini build for Netgear routers with 4MB flash (WNR2000v2, WNR3500v2), removed RIPv1/v2 routing from Mini build due to Netgear size restrictions, added JFFS to Mini build to make use of some otherwise wasted flash space.
* Fixed flashing all supported Netgear routers back to OEM firmware.
* Media server: removed some rare and obsolete demuxers to reduce size, reduced MiniDLNA memory usage.
* Minor backports from upstream 2.6 kernel.

NOTES:

1. When upgrading Netgear routers from previous build 51, you will get an error message "Error writing fake Netgear CRC". Don't worry about it - just wait for a couple minutes for router to reboot, and the new firmware will be loaded anyway, regardless of this error.
2. A few new options are now automatically added to the default Dnsmasq configuration file, so if you have the same options in the Dnsmasq Custom Configuration box, you need to remove them to avoid errors starting Dnsmasq. The new options are:
* log-async
* all-servers ( * cache-size (

Tomato Firmware without USB (Compatible with NETGEAR WNR3500L)

BETA 20 build of Tomato 1.28.9050, compatible with NETGEAR WNR3500L, from SourceForge.

Installation information here:
http://www.myopenrouter.com/article/17506/Installing-Tomato-Early-Firmwa.....

More information in this thread:
http://www.myopenrouter.com/forum/thread/17828/How-to-install-Tomato-on-.....

***Note - this version does not support USB. For more options and builds, click the SourceForge link.***
http://sourceforge.net/projects/tomatousb/files/

Tomato Firmware with USB (Compatible with NETGEAR WNR3500L)

BETA 20 build of Tomato 1.28.9050, compatible with NETGEAR WNR3500L, from SourceForge.

Installation information here:
http://www.myopenrouter.com/article/17506/Installing-Tomato-Early-Firmwa.....

More information in this thread:
http://www.myopenrouter.com/forum/thread/17828/How-to-install-Tomato-on-.....

***Note - this is the USB supported version. For more options and builds, click the SourceForge link.***
http://sourceforge.net/projects/tomatousb/files/

Pages