R8000 - Can't get VAP WLAN1.1 added to bridge

1 post / 0 new
Wed, 06/15/2016 - 2:06pm
#1
Jwiersma
Jwiersma's picture
R8000 - Can't get VAP WLAN1.1 added to bridge

I try to add my SSID "Guest_2.4" which is defined as VAP on WLAN1.1 to bridge1 which is my guest lan subnet (192.168.5.0/24 via VLAN 5). It works fine for SSID "Guest" which is VAP on WLAN2.1.

For unclear reasons, WLAN2.1 and VLAN5 are attached to bridge1, but WLAN1.1 isn't, altought it is in the "assign to bridge"  list. See below for actual configuration.

Anybody an idea why WLAN1.1 is not added to bridge1? 

 

VLAN Tagging

 

Tagging 
VLAN 0 Interface

  Tag Number   Prio 

 

 

 

Bridging

 

Create Bridge 
Name MSTP IGMP Snooping Prio MTU Root MAC  
IP Address

...

Subnet Mask

...

 

Assign to Bridge 
Assignment 0  

  BridgeInterface 

  Prio  

Assignment 1  

  BridgeInterface 

  Prio  

Assignment 2  

  BridgeInterface 

  Prio  

 

Current Bridging Table 
Bridge Name STP enabled Interface
br0 yes vlan1 vlan2 eth1 eth2 eth3
br1 yes wl2.1 vlan5
 

 

 
Top