[SOLVED] Interfaces on my WNR3500Lv2 with Tomato

2 posts / 0 new
Last post
DonutMan
DonutMan's picture
[SOLVED] Interfaces on my WNR3500Lv2 with Tomato

Hi all,

I've just updated my WNR3500Lv2 firmware to the latest Tomato release and it works great.

Nevertheless, I'm a little bit surprised because, with the default installation, I see I have 6 different interfaces on my router, while I expected no more than 4 (loopback, eth WAN side, eth LAN side and Wi-Fi).

 

Here's the result of an ifconfig, it seems that Tomato have created two VLAN. Are those two VLAN necessary ? Can I remove them ?

- br0 --> IP of my router, LAN side

- eth0 --> no IP, same MAC adress than br0

- eth1 --> no IP

- lo --> 127.0.0.1

- vlan1 --> no IP, same MAC adress than eth0 and br0

- vlan2 --> IP of my router, WAN side

 

Thanks a lot :)

 

Donut

DonutMan
DonutMan's picture
For those who are interested,

For those who are interested, Shibby answered my question at this adress :

http://www.linksysinfo.org/index.php?threads/shibby-tomato-and-default-v...

BR,
Donut