R6400/R6400v2 Open Source Firmware

Topic / Topic starter Replies Last postsort ascending
Hot topic Update: Installing Kong build on Netgear R6400v2 (Workaround)
by TXUSA » Wed, 06/06/2018 - 8:42pm
23
by Danser
Sat, 12/08/2018 - 10:38am
Hot topic Merlin Asus WRT on R6400v1
by tweakradje » Wed, 12/13/2017 - 3:03am
30
by tweakradje
Tue, 10/02/2018 - 12:49pm
Normal topic rollback to Tathagata or Kong from beta 36154
by ppx86 » Thu, 08/30/2018 - 2:55pm
5
by TXUSA
Tue, 09/04/2018 - 12:43pm
Normal topic R6400v1 / R6400v2 different board ID
by TXUSA » Thu, 06/14/2018 - 3:07pm
4
by TXUSA
Sun, 08/05/2018 - 7:20pm
Normal topic R6400 Stable firmware
by michelecutri » Thu, 03/15/2018 - 10:29am
7
by Tarnak
Mon, 06/25/2018 - 1:01pm
Normal topic Restoring r6400v2 to Stock Firmware
by koopatroopa » Tue, 05/22/2018 - 6:22pm
2
by TXUSA
Thu, 06/14/2018 - 3:22pm
Hot topic XWRT-Vortex AsusWRT-Merlin on R6400v2
by prakhar » Fri, 02/16/2018 - 5:47am
21
by TXUSA
Thu, 06/14/2018 - 8:29am
Hot topic Netgear r6400v2 firmware
by cobrax2 » Mon, 06/12/2017 - 1:17am
25
by TXUSA
Mon, 06/11/2018 - 9:04am
Normal topic R6400v2: ddwrt r31884 - Channel width and VHT80
by Sateetje » Sun, 10/08/2017 - 12:49pm
1
by TXUSA
Fri, 06/08/2018 - 11:09am
Normal topic Brand new R6400v2 unable to flash Kong DDWRT
by TXUSA » Sat, 06/02/2018 - 3:47pm
2
by TXUSA
Wed, 06/06/2018 - 8:19am
Normal topic KONG - Wireless
by odurouter » Wed, 07/20/2016 - 7:40am
3
by TXUSA
Sat, 06/02/2018 - 3:44pm
Normal topic IP Traffic vs Bandwidth
by dbtech » Thu, 03/29/2018 - 12:28pm
1
by ddennis002
Sat, 03/31/2018 - 6:49pm
Normal topic Advancedtomato on Netgear R6400 openvpn client wont start
by gytepr65 » Sat, 03/10/2018 - 12:15pm
1
by gytepr65
Sun, 03/11/2018 - 5:33am
Normal topic Wifi Dropped
by TechnicalMarvel » Mon, 01/08/2018 - 2:55am
8
by rjunke
Mon, 02/26/2018 - 12:41pm
Normal topic AdvancedTomato for NETGEAR R6400 (3.4-140 TRX)
by blueeyiz702 » Thu, 12/07/2017 - 1:32am
1
by bigjohn
Tue, 12/19/2017 - 9:07am
Normal topic Shibby TomatoUSB install for R6400, can't see any controls, can't revert! Help!
by davidkean » Wed, 06/28/2017 - 6:35am
2
by maxfield.allison
Mon, 12/18/2017 - 9:52am
Normal topic Wrong MAC assignment for LAN and Wireless MAC - DD-WRT r27261 - NETGEAR R6400
by bugmenot » Tue, 08/18/2015 - 10:59am
1
by axeman
Fri, 08/25/2017 - 7:54pm
Normal topic port fowarding
by suaxiong » Sun, 07/23/2017 - 8:32pm
0
by suaxiong
Sun, 07/23/2017 - 8:32pm
Normal topic Slow WAN speed
by jspace » Tue, 12/06/2016 - 3:33am
4
by rhiltbrunn
Mon, 07/10/2017 - 1:54pm
Normal topic Overclocking
by rcn116 » Sat, 12/12/2015 - 8:58am
10
by Haldi
Thu, 05/11/2017 - 11:23am
Normal topic Tomato causing R6400 to lockup. I need help.
by tcaudill01 » Thu, 05/04/2017 - 10:28am
1
by marc@louisville...
Mon, 05/08/2017 - 4:48pm
Normal topic Switch from tomato shibby to dd-wrt Kong Mod
by cafissimo » Tue, 02/07/2017 - 8:50am
3
by cafissimo
Fri, 04/07/2017 - 4:13pm
Normal topic There's also now a new BrainSlayer build with R6400 Support
by danne2 » Sun, 06/19/2016 - 1:20pm
7
by mpalermo73
Tue, 01/10/2017 - 3:59am
Normal topic "nvram export --set" gives no output
by milspec » Tue, 11/29/2016 - 8:11am
0
by milspec
Tue, 11/29/2016 - 8:11am
Normal topic Kong Mod build 30020M
by swainston_JRG » Sun, 08/28/2016 - 4:01am
3
by mlord
Sat, 10/15/2016 - 11:27am
New posts
No new posts
Hot topic with new posts
Hot topic without new posts
Sticky topic
Locked topic