Stock Firmware --Warning!

6 posts / 0 new
Last post
lllsondowlll
lllsondowlll's picture
Stock Firmware --Warning!

http://www.desipro.de/dd-wrt/Notice.txt

Desipro shut down the file share for the dd-wrt kong mod file shares without warning. After seeing this, I immediately decided to go to openwrt due to the dropped update support; however, the stock firmware bin images were also taken down. Now I am trapped on a dd-wrt build with no way to go back to stock, or otherwise. Does anyone have a mirror for these files?

I'm actually very upset this was handled this way and I feel like a mirror should have been offered instead of the terrible notice.txt to give end users a way to move off the firmware. I want control back over my device.

kshap82
kshap82's picture
I have the same problem. Does

I have the same problem. Does someone know of a site where we could download the correct file to restore our routers to factory condition?

kshap82
kshap82's picture
I just found this link on

I just found this link on another part of the site - thanks to Markg999 for posting it.

https://www.myopenrouter.com/download/netgear-r9000-nighthawk-x10-stock-...

donmeek
donmeek's picture
The link posted by kshap82 is

The link posted by kshap82 is for the R9000 nighthawk (not R7800) - does anyone have a copy of KONG's "ddwrt-to-netgear-fw-R7800.bin" file which was removed along with all the other files on the www.desipro.de/dd-wrt website?

linch
linch's picture
Hi to all,

Hi to all,

this is the link to firmware for R7800.

https://mega.nz/#!M0pzFYrT!aDHQMr0PhhXpz3kQKKzVVPvWHATQ-it1ew3Y4cYMnhg

Regards

donmeek
donmeek's picture
Thanks for the link - it's

Thanks for the link - it's too bad the restoration firmware also disappeared when KONG shut down his repository but this does the job!