DD-WRT for R7500/R7500v2

DD-WRT Kong Mod for NETGEAR R7500v2 (2018-02-15)(BIN)

updated 2018-02-15
R7500v2 build: Flash R7500v2-factory-to-ddwrt.img build from Netgear firmware. Once dd-wrt is running you have to use ddwrt-netgear-R7500v2.bin to flash future updates. Currently known issue: -2G and 5G leds are not operational since they cannot be controlled through gpio. Current opensource wireless driver has no support to control these leds. If you want to revert to netgear firmware flash: ddwrt-to-netgear-fw-R7500v2.bin


All models:

To install additional packages mount a usb drive to /opt e.g. through USB mount options, then run command:

  bootstrap
 
now you should be able to install additional packages using opkg e.g.:

opkg update
opkg list
opkg install vim

DD-WRT Kong Mod for NETGEAR r7500V2 (2017-11-01 BIN)

R7500v2 build:

Flash R7500v2-factory-to-ddwrt.img build from Netgear firmware.
http://www.desipro.de/ddwrt/K3-AC-IPQ806X/

THIS IS THE .BIN FILE FOR USE ONLY WHEN UPGRADING FROM A PREVIOUS KONG VERSION. IF YOU NEED THE INITIAL .IMG FLASH FILE, HEAD TO KONG'S SITE ABOVE.

------------------------------------------------------------------------------------

Once dd-wrt is running you have to use ddwrt-netgear-R7500v2.bin
to flash future updates.

Currently known issue:

-2G and 5G leds are not operational since they cannot be controlled through gpio.
 Current opensource wireless driver has no support to control these leds.

If you want to revert to netgear firmware flash: ddwrt-to-netgear-fw-R7500v2.bin

------------------------------------------------------------------------------------

r7800 build:

Flash r7800-factory-to-ddwrt.img build from Netgear firmware.
Once dd-wrt is running you have to use ddwrt-netgear-r7800.bin
to flash future updates.

Currently known issue:

-2G and 5G leds are not operational since they cannot be controlled through gpio.
 Current opensource wireless driver has no support to control these leds.
 
If you want to revert to netgear firmware flash: ddwrt-to-netgear-fw-r7800.bin

----------------------------------------------------------------------------------

All models:

To install additional packages mount a usb drive to /opt e.g. through USB mount options, then run command:

  bootstrap
 
now you should be able to install additional packages using opkg e.g.:

opkg update
opkg list
opkg install vim

DD-WRT Kong Mod for NETGEAR R7500v2 (2017-07-24)(BIN)

Note: as with previous Kong builds for the r7800 and R7500v2, this build requires an initial flash file as noted below.

-----------------------------------------------------------------------------------

R7500v2 build:

Flash R7500v2-factory-to-ddwrt.img build from Netgear firmware.
Once dd-wrt is running you have to use ddwrt-netgear-R7500v2.bin
to flash future updates.

The initial flash file (IMG) can be found here: http://www.desipro.de/ddwrt/K3-AC-IPQ806X/

Currently known issue:

-2G and 5G leds are not operational since they cannot be controlled through gpio.
 Current opensource wireless driver has no support to control these leds.

If you want to revert to netgear firmware flash: ddwrt-to-netgear-fw-R7500v2.bin

------------------------------------------------------------------------------------

r7800 build:

Flash r7800-factory-to-ddwrt.img build from Netgear firmware.
Once dd-wrt is running you have to use ddwrt-netgear-r7800.bin
to flash future updates.

The initial flash file (IMG) can be found here: http://www.desipro.de/ddwrt/K3-AC-IPQ806X/

Currently known issue:

-2G and 5G leds are not operational since they cannot be controlled through gpio.
 Current opensource wireless driver has no support to control these leds.
 
If you want to revert to netgear firmware flash: ddwrt-to-netgear-fw-r7800.bin

----------------------------------------------------------------------------------

All models:

To install additional packages mount a usb drive to /opt e.g. through USB mount options, then run command:

  bootstrap
 
now you should be able to install additional packages using opkg e.g.:

opkg update
opkg list
opkg install vim
 

DD-WRT Kong Mod for NETGEAR R7500v2 (2017-06-11)(BIN)

R7500v2 build:

Flash R7500v2-factory-to-ddwrt.img build from Netgear firmware.
Once dd-wrt is running you have to use ddwrt-netgear-R7500v2.bin
to flash future updates.

The initial flash file (IMG) can be found here: http://www.desipro.de/ddwrt/K3-AC-IPQ806X/

Currently known issue:

-2G and 5G leds are not operational since they cannot be controlled through gpio.
 Current opensource wireless driver has no support to control these leds.

If you want to revert to netgear firmware flash: ddwrt-to-netgear-fw-R7500v2.bin

------------------------------------------------------------------------------------

r7800 build:

Flash r7800-factory-to-ddwrt.img build from Netgear firmware.
Once dd-wrt is running you have to use ddwrt-netgear-r7800.bin
to flash future updates.

Currently known issue:

-2G and 5G leds are not operational since they cannot be controlled through gpio.
 Current opensource wireless driver has no support to control these leds.
 
If you want to revert to netgear firmware flash: ddwrt-to-netgear-fw-r7800.bin

----------------------------------------------------------------------------------

All models:

To install additional packages mount a usb drive to /opt e.g. through USB mount options, then run command:

  bootstrap
 
now you should be able to install additional packages using opkg e.g.:

opkg update
opkg list
opkg install vim

 

DD-WRT Kong Mod for NETGEAR R7500v2 (2017-06-04)(BIN)

R7500v2 build:

Flash R7500v2-factory-to-ddwrt.img build from Netgear firmware.
Once dd-wrt is running you have to use ddwrt-netgear-R7500v2.bin
to flash future updates.

The initial flash file (IMG) can be found here: http://www.desipro.de/ddwrt/K3-AC-IPQ806X/

Currently known issue:

-2G and 5G leds are not operational since they cannot be controlled through gpio.
 Current opensource wireless driver has no support to control these leds.

If you want to revert to netgear firmware flash: ddwrt-to-netgear-fw-R7500v2.bin

------------------------------------------------------------------------------------

r7800 build:

Flash r7800-factory-to-ddwrt.img build from Netgear firmware.
Once dd-wrt is running you have to use ddwrt-netgear-r7800.bin
to flash future updates.

Currently known issue:

-2G and 5G leds are not operational since they cannot be controlled through gpio.
 Current opensource wireless driver has no support to control these leds.
 
If you want to revert to netgear firmware flash: ddwrt-to-netgear-fw-r7800.bin

----------------------------------------------------------------------------------

All models:

To install additional packages mount a usb drive to /opt e.g. through USB mount options, then run command:

  bootstrap
 
now you should be able to install additional packages using opkg e.g.:

opkg update
opkg list
opkg install vim

DD-WRT Kong Mod for NETGEAR R7500v2 (2017-05-12)(BIN)

Updated 2017-05-12

R7500v2 build:

Flash R7500v2-factory-to-ddwrt.img build from Netgear firmware.
Once dd-wrt is running you have to use ddwrt-netgear-R7500v2.bin
to flash future updates.

The initial flash file can be found here: http://www.desipro.de/ddwrt/K3-AC-IPQ806X/

Currently known issue:

-2G and 5G leds are not operational since they cannot be controlled through gpio.
 Current opensource wireless driver has no support to control these leds.

If you want to revert to netgear firmware flash: ddwrt-to-netgear-fw-R7500v2.bin

------------------------------------------------------------------------------------

r7800 build:

Flash r7800-factory-to-ddwrt.img build from Netgear firmware.
Once dd-wrt is running you have to use ddwrt-netgear-r7800.bin
to flash future updates.

Currently known issue:

-2G and 5G leds are not operational since they cannot be controlled through gpio.
 Current opensource wireless driver has no support to control these leds.
 
If you want to revert to netgear firmware flash: ddwrt-to-netgear-fw-r7800.bin

----------------------------------------------------------------------------------

All models:

To install additional packages mount a usb drive to /opt e.g. through USB mount options, then run command:

  bootstrap
 
now you should be able to install additional packages using opkg e.g.:

opkg update
opkg list
opkg install vim
 

DD-WRT Kong Mod for NETGEAR R7500v2 (2017-04-04)(BIN)

R7500v2 build:

Flash R7500v2-factory-to-ddwrt.img build from Netgear firmware.
Once dd-wrt is running you have to use ddwrt-netgear-R7500v2.bin
to flash future updates.

The initial flash file can be found here: http://www.desipro.de/ddwrt/K3-AC-IPQ806X/

Currently known issue:

-2G and 5G leds are not operational since they cannot be controlled through gpio.
 Current opensource wireless driver has no support to control these leds.

If you want to revert to netgear firmware flash: ddwrt-to-netgear-fw-R7500v2.bin

------------------------------------------------------------------------------------

r7800 build:

Flash r7800-factory-to-ddwrt.img build from Netgear firmware.
Once dd-wrt is running you have to use ddwrt-netgear-r7800.bin
to flash future updates.

Currently known issue:

-2G and 5G leds are not operational since they cannot be controlled through gpio.
 Current opensource wireless driver has no support to control these leds.
 
If you want to revert to netgear firmware flash: ddwrt-to-netgear-fw-r7800.bin

----------------------------------------------------------------------------------

All models:

To install additional packages mount a usb drive to /opt e.g. through USB mount options, then run command:

  bootstrap
 
now you should be able to install additional packages using opkg e.g.:

opkg update
opkg list
opkg install vim

DD-WRT "Kong Mod" for NETGEAR R7500v2 Updated 2017-03-05

Updated 2017-03-05

Factory -> DD-WRT Build

http://www.desipro.de/ddwrt/K3-AC-IPQ806X/

R7500v2 build:

Flash R7500v2-factory-to-ddwrt.img build from Netgear firmware.
Once dd-wrt is running you have to use ddwrt-netgear-R7500v2.bin
to flash future updates.

Currently known issue:

-2G and 5G leds are not operational since they cannot be controlled through gpio.
 Current opensource wireless driver has no support to control these leds.

If you want to revert to netgear firmware flash: ddwrt-to-netgear-fw-R7500v2.bin

------------------------------------------------------------------------------------

r7800 build:

Flash r7800-factory-to-ddwrt.img build from Netgear firmware.
Once dd-wrt is running you have to use ddwrt-netgear-r7800.bin
to flash future updates.

Currently known issue:

-2G and 5G leds are not operational since they cannot be controlled through gpio.
 Current opensource wireless driver has no support to control these leds.
 
If you want to revert to netgear firmware flash: ddwrt-to-netgear-fw-r7800.bin

----------------------------------------------------------------------------------

All models:

To install additional packages mount a usb drive to /opt e.g. through USB mount options, then run command:

  bootstrap
 
now you should be able to install additional packages using opkg e.g.:

opkg update
opkg list
opkg install vim

 

DD-WRT Kong Mod for NETGEAR R7500v2 (Factory to DD-WRT)

Updated 2016-12-08

R7500v2 build:

Flash R7500v2-factory-to-ddwrt.img build from Netgear firmware.
Once dd-wrt is running you have to use ddwrt-netgear-R7500v2.bin
to flash future updates.

Latest BIN available here: http://www.desipro.de/ddwrt/K3-AC-IPQ806X/

Currently known issue:

-2G and 5G leds are not operational since they cannot be controlled through gpio.
 Current opensource wireless driver has no support to control these leds.

If you want to revert to netgear firmware flash: ddwrt-to-netgear-fw-R7500v2.bin

DD-WRT "Kong Mod" for NETGEAR R7500v1 (experimental) 2016-11-10

Experimental R7500 build:

This build does not include support for the quantenna radio 5G and won't likely ever get support for it.
You can flash from Netgear webif by uploading: R7500v1-factory-to-ddwrt.img

Flashing back to Netgear fw through webif is not supported. To flash back to Netgear firmware,
login via telnet or ssh, then run command:

erase linux
reboot

the router will reboot and start tftpd server (flashing power light indicates tftpd ready).

Now push oem firmware through tftp client:

tftp 192.168.1.1
binary
put R7500-V1.0.0.94.img

Important:

This build is not supposed to be an alternative to oem firmware as there is no 5G support. It is
rather a proof of concept:-)
This build however prepares dd-wrt for full R7500V2 support which has two supported atheros radio

http://www.desipro.de/ddwrt/K3-AC-IPQ806X/

Pages