Problem with new Tomato firmware

5 posts / 0 new
Last post
rakha
rakha's picture
Problem with new Tomato firmware

Hi

I have tested the latest Tomato firmware for wgr614l.  In 'Status Overview' page, the disable button is not working. I want to turn off the wireless radio. But its not happened.

SouvikGhosh
SouvikGhosh's picture
yes, I have already added a

yes, I have already added a blog regarding this...

mona
mona's picture
I am using wgr614l(with

I am using wgr614l(with Tomato firmware) as Access Point.  What should be the configuration to use it in wireless mode WDS or Wireless Client?

SouvikGhosh
SouvikGhosh's picture
1. Please select the wireless

1. Please select the wireless mode as WDS.
2. Specify the MAC address of the AP with wihich you want to associate wgr614l
3. save the setting.

You will need to follow the same steps for the second AP also.

hankhilliard
hankhilliard's picture
When selecting WDS in the

When selecting WDS in the first router and second, cannot connect to wireless network. With first router set to AP and WDS second set to WDS laptop will not roam to second AP. Tried all of the configurations but the second unit seems to not allow connections. I also have access control set up to only allow specific MAC's to access Internet. The second unit shows up in the Device List but not with IP 192.168.1.2 which was assigned. Where am I going wrong? Thanks is advance.