Kong - r20805 WNDR4000 - WAN port problem

Hi All,

I installed the latest  /ddwrt/r20805/usb-ftp-samba3-dlna-nv64k-broadcom.bin on WNDR4000

Wireless is working very nice - 10 MByte/s  ... vs 5 MB with the stock but I have a major problem- the WAN connection is getting interupted. Breaks every 5-10 sec

I have a DSL modem and the router does PPPOE. In between, I have power line adaptors(the connection between varies 50-90 Mbit) Green light on the WAN port.

No issues with the stock - stable connection 8-10 Mbit/s. With Kong's - the internet connection drops for a few seconds(ping no connection), when it works the speed varies from 500 Kb to 10 Mbit (rarely - mostly around 2 Mbit/s). After few tests the connection breaks again and starts slow, then fast, then breaks and so on.

The WAN ip stays the same and cannot see the logs to say if the router redials PPPOE or what happens during those connection interuptions. Any ideas?

Regards,

Viktor