The router is on a boot loop and keeps resetting

2 posts / 0 new
Last post
tninfr@gmail.com
tninfr@gmail.com's picture
The router is on a boot loop and keeps resetting

Having some issues with my R7000 with a Kong build on it.

I mistakingly add something to the script and made it execute on boot up, which just made the router go in a loop.

I bought a usb to ttl cable and can see everything, i can get a ping out of the router but only for a couple of seconds then its lost. here is some of the log.

The router is on a boot loop and keeps resetting. 

When I ping the router I get mostly "Request time out" with a TTL=100 4 times in a row every now and again, then it restarts.

When using a serial usb cable and putty to flash firmware into it I can't successfully break (Ctrl+c)

It's never allowing me to break with putty.

Hope someone can help me out.

jsb
jsb's picture
Hi,

Hi,

I've got a similar trouble, but it wasn't with adding something to the script. I disconnect the cable of the Wan port. Then it become stable and I remove testing external sites (google.com and microsoft.com) every 2 minutes. Then plug the Wan cable.