Trying to do a serial recovery on my wnr3500lv2 and can't seem to get it done, ctrl-c is not working, this is the terminal output, anyone have any idea what's up?
Found a Samsung NAND flash with 2048B pages or 128KB blocks; total size 128MBDecompressing...done
CFE for WNR3500Lv2 version: v1.0.9Build Date: Fri May 6 11:54:17 CST 2011Init ArenaInit Devs.Boot partition size = 262144(0x40000)NFLASH Boot partition size = 524288(0x80000)et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.60.136CPU type 0x19749: 480MHzTot mem: 131072 KBytes
Device eth0: hwaddr 10-0D-7F-9B-EB-0C, ipaddr 192.168.1.1, mask 255.255.255.0 gateway not set, nameserver not set
Checking crc...done.
Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
Loading: .. 5192 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
And that's all it stops there..
As you can see the logs "board to PC" path of your console setup is ok. But as ctrl+c is not working problem lies in "PC to board" path. Check your serial client configuration and shouldering of serial pins on your board.