Hi, I bought a WNR3500L because I read on lot of review that this router support vlan tagging. Now I tried to setup this but it's not working. The setup is the same than on my WRT54GL (Working) but it's not working on the WNR3500L. Is there a guide on how to do it that is realy working. Did someone successfully configured it?
Thanks.
If there is no way to configure this on this model, is there a model of router with Gigabit switch that support dd-wrt and vlan tagging?
Thanks
Ok, I've solve my problem by myself. For any body interested in VLAN Trunk (Tagged) with WNR3500L and DD-WRT v24-sp2 (04/23/10) mini - build 14311.
I've configured vlan as usual with the Tagged Box checked and my vlan (9 for my test). After, I configured the Network setting with an IP for this vlan (Unbridged). I've also completly remove the iptables rules with iptables -F in the firewall command script (For testing purpose only). After all the setting, *** The MOST IMPORTANT Thing *** I've run those commands in ssh session :
nvram set vlan9ports="1t 8*"
nvram commit
This command set the vlan9 trunk on the physical port 4 (Phy port are in the wrong order) on the router. Note that you need the port 8* in your setting because this set the trunk between the internal ethernet port and the switch. After that everything work well. I've did some basic test but I try bridged communication within the same vlan on 2 different trunk port at near 500 Mbps (close to performance without trunk and stock firmware) with iperf. With routing between two different vlan, I've got a performance of about 150 Mbps (I did this test with 2 computer in different switch port.). I did'nt do any wireless test for the moment.
I am currious to see if it's the same thing with a Linksys WRT610n. I have one but it's still with the stock firmware. Maybe I will test it later.
I'm trying to get the same thing working, but I'm failing. sw:
DD-WRT v24-sp2 mega (c) 2010 NewMedia-NET GmbH
Release: 08/12/10 (SVN revision: 14929)
nvram looks like:
vlan1ports=1t 4 8*
But the machine on the tagged port sees untagged packets. What should I be looking at here? Thanks!
You should reference this link.
http://www.dd-wrt.com/wiki/index.php/Switched_Ports
The WNR3500L has been confirmed working with VLANs both ports and 802.1Q.
http://www.dd-wrt.com/wiki/index.php/VLAN_Support
You may have to upgrade your build to 15508 or better for the auto added VLAN code that was added by eko for gigabit models.