R7000 Kong's firmware - shared USB storage

34 posts / 0 new
Last post
slidermike
slidermike's picture
This is how it works for me.

This is how it works for me.
Assuming your usb drive is showing as mounted.
Samba: enabled
Server string: R7000 (can be anything)
workgroup: workgroup (this is default unless your in an AD)

path: mnt/sda1
subdir: (blank)
name: BUP (this is your share name, no spaces)
public: checked
access: read/write

If you started this after the pc then you will probably want to use the ip address of your router.
For me I access it like this from my windows pc.
\\192.168.1.1\bup

slidermike
slidermike's picture
This is how it works for me.

This is how it works for me.
Assuming your usb drive is showing as mounted.
Samba: enabled
Server string: R7000 (can be anything)
workgroup: workgroup (this is default unless your in an AD)

path: mnt/sda1
subdir: (blank)
name: BUP (this is your share name, no spaces)
public: checked
access: read/write

If you started this after the pc then you will probably want to use the ip address of your router.
For me I access it like this from my windows pc.
\\192.168.1.1\bup

Law
Law's picture
Thanks Slidermike, it's

Thanks Slidermike, it's working for me now =)

Pages