I just put both sets of code into the Startup Script and LAN 1 is still illuminated. Maybe its becuase its connected at 100MBps, or is its missling a line?
Any advice would be much appreciated.
Rehabilitation, underground utilities, sewer installation and repair
American Sewer and Utilities has consistently demonstrated excellence in the design and construction of a myriad of projects encompassing underground utilities, site development, leach fields, pump stations, landscaping, sanitary sewer, and municipal & residential rehabilitation. Our distinguished team comprises seasoned professionals and skilled artisans, dedicated to providing superior construction consultation and management services
Please run the following scripts on boot via startup script or terminal:
logger "Disabling LED Lights: Step 1"
# add this to your startup script to disable the lights on your r7000.
for i in 2 3 8 9 12 13 17 18 ; do gpio enable $i ; done
for i in 14 15 ; do gpio disable $i ; done
logger "Disabling LED Lights: Step 2"
# Run this from the command line to disable the 4 LAN lights.
et robowr 0x0 0x18 0x1ff
et robowr 0x0 0x18 0x0
et robowr 0x0 0x1a 0x0
I put in here, click apply, but after a reboot, nothing happen :(
It's wrong?
Sorry, i press Run Commands, there are not Apply ;)
Router does not recognize these commands -
et robowr 0x0 0x18 0x1ff
et robowr 0x0 0x18 0x0
et robowr 0x0 0x1a 0x0
Can anybody tell the right commands ?
Thanks.
Is step two maybe missing a line?
I just put both sets of code into the Startup Script and LAN 1 is still illuminated. Maybe its becuase its connected at 100MBps, or is its missling a line?
Any advice would be much appreciated.