No Internet after DD-wrt Flash

5 posts / 0 new
Last post
Mon, 05/29/2017 - 3:07pm
#1
Potterman210
Potterman210's picture
No Internet after DD-wrt Flash

Hello, very new to all of this.

After succefully flashing my R7000 router to the latest dd-wrt Kong version posted(Monday, May 22, 2017), I have no internet access. I reflashed my old netgear firmware and it works fine (provides internet).

I followed every step from this link but do not know what to do from here, could someone please help me troubleshoot?

https://www.tweaking4all.com/hardware/netgear-r7000-dd-wrt/

 

 

Top
Mon, 05/29/2017 - 10:45pm
Permalink
Potterman210
Potterman210's picture
Man these forums are pretty

Man these forums are pretty dead...

Top
Mon, 05/29/2017 - 10:46pm
Permalink
Potterman210
Potterman210's picture
SOLVED
SOLVED
I did a complete power cycle on the modem and router ---> hardreset the router by pressing the reset button for 30seconds (this gave my router internet, but no internet access)
 
I had to clone my modem's mac address into the WAN section of the router setup. After plugging directly from my modem to my laptop, I found the address "network and sharing" ---> "Change adapter setting" ---> right click the "Ethernet" adapter ---> "Status" and copied the "Physical Address" value. 
Shout out to the Netgear guru who helped me over the phone
Top
Fri, 06/02/2017 - 11:31pm
Permalink
Cinghialino
Cinghialino's picture
Tahnk you for your solution.

Tahnk you for your solution. I have your same problem and I'll be go into details soon to solve it. Thank you again.

Top
Sat, 06/03/2017 - 9:37am
Permalink
Cinghialino
Cinghialino's picture
just for curiosity, why did

just for curiosity, why did you had to clone your modem's MAC address?

Top