Help Vpn ?

15 posts / 0 new
Last post
beepdotpw59
beepdotpw59's picture
Help Vpn ?

Bonjour à tous, désolé je traduis avec Google, je viens d'installer le dernier firmware voxel pour mon routeur pour se connecter au Vpn Nord mais j'ai lu le tutoriel du forum je ne comprends rien au départ si une personne peut m aider merci

beepdotpw59
beepdotpw59's picture
Hello everyone, sorry I

Hello everyone, sorry I translate with Google, I just installed the latest voxel firmware for my router to connect to the North Vpn but I read the tutorial of the forum I do not understand anything at first if a person can help me thank you

beepdotpw59
beepdotpw59's picture
To finish I managed with this

To finish I managed with this method https://www.myopenrouter.com/article/how-set-openvpn-client-netgear-r9000-voxels-firmware

I have some question thanks.
If I unplug the USB key NordVpn this disconnect?
Is there a simpler way to change server? and not always put it on the usb key?
And it possible to assign the Vpn connection to certain IP address? Thanks for your help
beepdotpw59
beepdotpw59's picture
how to disconnect from vpn?

how to disconnect from vpn?

kamoj
kamoj's picture
Disconnect the OpenVPN client

Disconnect the OpenVPN client by eg one of these methods

- Add a file with name "disable" to your USB-device directory "openvpn-client", and insert the USB in the router

- Enable Telnet and log in to the router and issue command: /etc/init.d/openvpn-client stop

beepdotpw59
beepdotpw59's picture
Thanks my friends I searched

Thanks my friends I searched for two days, would you have a solution to activate the vpn on an ip mmlage and autoconnect? thanking you

kamoj
kamoj's picture
Default all traffic go
Default all traffic go through the Vpn connection.
Here is how to "Bypass the OpenVPN client tunnel" for devices that you connect directly to the router HW ports 1-4 (TV, Netflix, switches etc) or WiFi :
This can be done with the Netgear Genie GUI:
Advanced: Advanced Setup: VLAN/Bridge Settings: Enable VLAN/Bridge group: By bridge group: Wired Ports: <check the port you have connected the HW to> + Apply
 
Other functions you ask about is being tested and may be added e.g. to Voxel FW in the future.
beepdotpw59
beepdotpw59's picture
Thank you my friend your help

Thank you my friend your help I test it tonight when coming home from work thank you again

beepdotpw59
beepdotpw59's picture
so I put the bridge mode? and

so I put the bridge mode? and then I can configure different ports ethernet or wifi

beepdotpw59
beepdotpw59's picture
Ah not so much for me sorry

Ah not so much for me sorry no function edit on the forum, so here I can select what goes through the vpn or not just by checking the ethernet or the wifi can not adjust by IP address because I have an ethernet port who turns with a switch thank you for your help

kamoj
kamoj's picture
You can preferrably try

You can preferrably try Router Mode.
Sorry I don't speak French.

nilugeator
nilugeator's picture
hi all

hi all

kamoji : is there a way for the VPN to  bypass a specific PORT ? (not an IP)

thanks in advance

kamoj
kamoj's picture
I don't know, but you can try

I don't know, but you can try if using Voxels latest FW:
Create /root/firewall-start.sh and make it executable (eg with "chmod +x /root/firewall-start.sh"),
then add this to that file (for tcp on ports 1234 and 5678 - you might want udp ?!):
#!/bin/sh
iptables -t mangle -A OUTPUT -p tcp -m multiport --sports 1234,5678 -j MARK --set-mark 1

Reboot and see if it works. I have not tested this myself. I found this infomation via google surprise. So please try and report back.

beepdotpw59
beepdotpw59's picture
Hello, why is my router

Hello, why is my router disconnecting from openvpn when I log on to vpn on a computer?

owencool
owencool's picture
Please read the readme 1st

Please read the readme 1st before asking in the forum. In the readme, it clearly explain how to connect/disconnecting vpn, how to bypass, etc.