modyfying Tomato sources

3 posts / 0 new
Last post
lgolebio's picture
modyfying Tomato sources


Coupple days ago I started to compile my own tomato for ovslink WL-1600GL. The firmware works almost ok, but still few thing has to be done. First of all which file I need to edit to change VLAN configuration ? I need to change it because every time I flash the router I have to set proper vlans like this:

nvram set vlan1ports="4 5"

nvram set vlan0ports="0 1 2 3 5*"

nvram set manual_boot_nv=1

nvram commit


The second thing is GPIO's, which file I need to edit to set them properly. I would be very gratefull for all help :)


lgolebio's picture
Thanks, but I have already

Thanks, but I have already finished :)
Here is the tomato 1.27 firmware for WL-1600GL.

-All GPIO leds works ok
-JFFS2 works
-setting proper mac addres works
-vlan works out of the box
-WPS works
-reset switch works

lgolebio's picture