Please help using USB drive

9 posts / 0 new

Sun, 02/12/2012 - 3:02pm

Blowfish64

I can't find any tutorial on how to get a USB drive working with the Kong DD-WRT firmware. I have the drive auto-mounted as follows:

Disk 0:
--- /dev/scsi/host0/bus0/target0/lun0/disc
Block device, size 746.5 GiB (801569726464 bytes)
DOS/MBR partition map
Partition 1: 2.000 TiB (2199023255040 bytes, 4294967295 sectors from 1)
Type 0xEE (EFI GPT protective)
GPT partition map, 128 entries
Disk size 746.5 GiB (801569726464 bytes, 1565565872 sectors)
Disk GUID 4F24B4A6-E6BE-DA48-B27E-DD29375C832F
Partition 1: 128 MiB (134217728 bytes, 262144 sectors from 34)
Type MS Reserved (GUID 16E3C9E3-5C0B-B84D-817D-F92DF00215AE)
Partition Name "Microsoft reserved partition"
Partition GUID E59C8428-215F-254B-BC52-23171DDBF744
Blank disk/medium
Partition 2: 2.729 TiB (3000455135232 bytes, 5860263936 sectors from 264192)
Type Basic Data (GUID A2A0D0EB-E5B9-3344-87C0-68B6B72699C7)
Partition Name "Basic data partition"
Partition GUID 0B768B5A-51E5-3140-A13F-8114DE15346E
NTFS file system
Volume size 2.729 TiB (3000455134720 bytes, 5860263935 sectors)
Partition 3: unused
Mountpoints:
/dev/scsi/host0/bus0/target0/lun0/part1 mounted to /tmp/mnt/disc0-part1

That's wonderful. NOW WHAT? HOW THE F@CK DO I ACCESS IT?

Sun, 02/12/2012 - 10:47pm

Permalink

Subhra

There are so many ways of

There are so many ways of accessing your usb drive, e.g. using ssh/WinSCP, FTP, Samba and Windows Network Neighbourhood etc.

you can find the thorough guideline of using those in the following link ...
http://www.dd-wrt.com/wiki/index.php/USB_storage#Step_4_-_Enable_Network...

Mon, 02/13/2012 - 7:48pm

Permalink

Blowfish64

Can't I just get it to show

Can't I just get it to show up on my Windows Network?

Mon, 02/13/2012 - 10:57pm

Permalink

Subhra

You should find your USB

You should find your USB drive containt in "My Network Places" for Windows Operating System.

Wed, 02/15/2012 - 3:10am

Permalink

Subhra

Following is a link of

Following is a link of similar discussion ...
http://www.myopenrouter.com/forum/thread/32227/USB-How-to-get-it-working...

Hope it will help you.
Let us know about the result.

Wed, 02/15/2012 - 7:40pm

Permalink

Blowfish64

Subhra said: Following is a

Subhra said: Following is a link of similar discussion ... http://www.myopenrouter.com/forum/thread/32227/USB-How-to-get-it-working/#11165 Hope it will help you. Let us know about the result.

The problem is there is no path that I can select. When I click on the dropdown the only option is "--". Meanwhile under USB it still says my drive is mounted to

Mountpoints:
/dev/scsi/host0/bus0/target0/lun0/part1 mounted to /tmp/mnt/disc0-part1

It's very frustrating.

Thu, 02/16/2012 - 6:00pm

Permalink

Blowfish64

Anyone?