WN Series Open Source Firmware

WNDR3800 loses internet on wireless and ethernet

Crash25744's picture
Submitted by Crash25744 on Tue, 02/05/2013 - 9:47pm

Forums: 

   I've had this router for about 3 months with no problems until the last 2 weeks. The router works great for approx a day or 2 then I lose both wireless and wired connection. All light's are normal on the router when this occurs. I try to login to the router through a wired connection using the genie and it can not connect. I also try to via web using my ip remote access login. And still nothing. After turning off the router for 10 seconds using the power button the router operates properly.

Shibby Big-vpn 92, 102, 104, 105 No BT gui - Should I manually reinstall the BT client?

pheonix991's picture
Submitted by pheonix991 on Mon, 02/04/2013 - 5:06pm

Forums: 

I'm on Shibby's mod, Big-VPN build 105.  I've tried BT-gui also.  All the same issues.  The issue being, the Transmission Gui does not work.  I can't access it externally, and I cannot access it internally.

 

I've tried going from Toastman to  Shibby, no gui.  I've tried stock firmware to ddwrt prep to shibby, no gui.  I've tried ddwrt prep to shibby, no gui.  Nothing I do seems to work.

 

Should I just try uninstalling Transmission, then reinstall it?

 

Or does anyone else have any other ideas?

Multiple public / wan ip port forwarding HELL!!!

WetJet's picture
Submitted by WetJet on Sun, 02/03/2013 - 11:55am

Forums: 

I've scoured the internet high and low trying to get this to work properly. So far, nothing has worked. I've used 2 different routers, a Netgear WNR3500L v1, and a Netgear WNDR4500, both flashed with the latest available firmwares as of 02/02/2013. I've even tried Tomato on the WNR3500L.

Port forwarding by itself on a single pubilc IP does work, as long as I'm using the GUI, and not iptables commands.

Need help with WNDR3500L v2 Setup and other questions

Forensics1's picture
Submitted by Forensics1 on Sat, 02/02/2013 - 2:16pm

Forums: 

Hello all.

We have a WNDR3400 in place and running our small office newtork. We love it, especially all of those flashing blue lights in the dome! We use those lights as a marketing tool because when our clients visit they always ask about them and wonder if that box is some sort of exotic security, RADAR detector, or like device.

But, due to the construuction of our building there is a giant dead spot in one area. 

We also have a WNDR3500L v2 sitting in a box awaiting a job.

WNR3500Lv2 : which firmware should I use ?

DonutMan's picture
Submitted by DonutMan on Mon, 01/28/2013 - 2:39pm

Forums: 

Hi all,

I've just bought a WNR3500Lv2 router and I'm very happy with it.

I plan to change the firmware with an open source one. I actually hesitate between DD-WRT and Shibby Tomato. And when I read the list of all possible problems that may occur... I also hesitate with keeping the native netgear firmware :/

I would like to have some advice from WNR3500Lv2 users and what they think about the firmware they chose.

 

Using usb printer for home group.

BillGoep's picture
Submitted by BillGoep on Wed, 01/23/2013 - 11:26pm

Forums: 

I perchased a WRN3500L router to be able to use a usb printer from any computer in my house with out having to have one computer on as printer host. I am unable to do this even with following the steps provided in the Genie. I run in to this modle is not supported for print server funtion. Not a Worning it's just not on any of the lists. I know that most of the new printers these days are wifi but I can not afford them yet. Any aid in this endever would be greatly apprecieated.

certain destination websites bypass vpn

smokey420's picture
Submitted by smokey420 on Wed, 01/16/2013 - 12:56pm

Forums: 

I have a wnr3500l v2 router running Tomato Firmware 1.28.0000 MIPSR2-102 K26 USB AIO.

Netgear firmware have better wifi signal/throughput than DD-WRT??

Wildgoose's picture
Submitted by Wildgoose on Mon, 01/14/2013 - 1:37pm

Forums: 

I’ve been running Kong’s DD-WRT firmware on my 3500L and has been very happy with its performance, except wireless. While the router has been rock solid, reboot not necessary even after a few month of heavy use, the wireless signal in certain part of my house has been weak and slow.

Is it possible to create this setup

Nebelung's picture
Submitted by Nebelung on Tue, 01/01/2013 - 3:39pm

Forums: 

I access the internet through a netgear wireless router connected to an adsl modem. I also have a technicolor 546v6 wired router connected to a separate phone line used as a vpn network, currently this router is connected to my nic and I used route ADD to route 10.2.2.0 ip to this router.
Ive made a network diagram in the best of my ability (please don't laugh) of the network configuration I'm interested in.

can not login WNDR3800 gui after install openwrt OpenWRT_WNDR3800_Release_08_23_11

inetge.net's picture
Submitted by inetge.net on Fri, 12/28/2012 - 9:42pm

Forums: 

I install OpenWRT_WNDR3800_Release_08_23_11 in WNDR3800，

now,i can not login WNDR3800 gui,when i input 192.168.1.1 note:

 can not tenet,cat not TFTP...

what can i do ?please

Pages