WN Series Open Source Firmware

The Genie app that comes with the wnr3500Lv2

At the risk of opening this topic, I need some help with the Genie app that came with my wonderful wnr3500Lv2 router. At the moment, I have loaded this app on all of my router clients that I can. Now, after 2 weeks of use, I find the Genie app crashing in WinXPpro SP3 with a small gray window with the red phillips scre head. I have learned that this means some sort of WinXP error. OK fine. The text in the error box reads:

"Runtime Error

Program: C:\Program Files\Netgear Genie\bin\Netgear Genie.exe

Power Supply Question

Hey guys,

I'm just wondering if any of you that have this router can tell me the output amps/volts for the power supply.  I've had my router stored away and need to use it now, and I have 3 different power supplies.  Two of them are 1.0 amps and one is 1.5 amps output.  

Thanks!

on/off Button - WNR3500L V2

hello guys,

 

I'm new here in the forum, and I hope you can help me.

 

2 weeks ago I bought a netgear WNR3500L V2, bc my old router slow down my internetspeed.

today I checked out the DD-WRT firmware (DD-WRT v24-sp2 (04/10/12)).

 

now, the question is: how can I activate the WLAN on/off button?

with the standart firmware, the button on the rear side do exactly that what I want.

 

Router is capping my bandwidth

Recently I noticed that I am no longer utilizing my full bandwith. After a bit of troubleshooting I noticed that my router (3500l running tomato) is capping my connection.

I have no idea why since it's worked perfect for over a year.

Wan and Lan1 ports swapped

After reading how well supported the 3500v2 is by Tomato, I bought one just to run Tomato.

Following the instructions, I had no problem installing the latest Tomato (Shibby v111 AIO) and also accessing the web UI.

However, although I have an Ethernet cable connected to my PC from LAN1 and no cable connected to the WAN port, the web UI shows the WAN port is the only port connected. When I switch the cable from LAN1 to LAN4 the UI shows the WAN port now disconnected and LAN4 connected. After that, I switch the cable from LAN4 to the WAN port and the UI shows LAN1 connected.

Are the developers still active here? upgrading Q...

So guys and gals

 

I have :

Tomato Firmware v1.28.9054 MIPSR2-beta K26 USB vpn3.6

USB support integration and GUI,
Linux kernel 2.6.22.19 and Broadcom Wireless Driver 5.10.147.0 updates

 

on my router today.  What should I upgrade to, that won't make me reconfigure all my IP adddresses / DHCP...

Netgear WNR3500LV2 wifi trigger

Hello to all,
today I got my Netgear WNR3500L v2 from Amazon. I flashed it with the latest Tomato Firmware 1.28.0000 MIPSR2-111 K26 USB AIO.
I can acess the router with webinterface but the wifi hardware trigger to turn off wlan seems to be out of function? Is this a known bug. What can I do?
Thanks a lot

WNR3500L v2 as Access Point

Hi

I'd like to use my WNR3500L v2 as an accesspoint. I have a Devolink Router/Moden (2in1), but it really sucks. Since I don't have a different Modem I want to use the Devolink as the Modem and connect my Netgear Router to it. I tried the following things:

 

1. Disable DHCP

2. Tick "Bridge WAN with primary LAN"

3. Connect Devolink via LAN1 to Internet (WAN) or LAN1 of Netgear, both didn't work.

 

My DD-WRT is really kidding me, need fast help...

Hi together,

 

i has a Netgear WNR3500L v2 and i has installed the 

DDWRT_WNR3500Lv2_Support_Release_04-11-2012

.chk file from this page. (Not compiled, i has used the file, which was default in the directory.

 

The installation was successfully and if i got to the page (192.168.1.1) i will asked for login from dd-wrt, BUUUUUUUTTTT!!!!!!

root, admin dont work.

I has tryed all like: admin admin, root root, root *void*, admin *void*, admin password, and so on but no fu** sh*** is working. WTF?

 

Please help me....

How block all incoming IP address and enable only my incoming IP list?

Hello,I have WNR3500L.I need to block all incoming internet IP address from WAN to my local LAN devices (NAS, PC, and others), and I need to enable incoming access only from my list of trusted internet IP address.Can I do it with the official firmware? I believe not.Which firmware  is the better to do it? Which firmware is the most flexible in security configurations as this above?Thanks

Pages